Coverboy The Pool Boy is a realistic beige dildo with a moderate 1.5-inch maximum width and a published 5.5-inch insertable length. Its broad suction-cup base supports hands-free positioning on a suitable surface and is designed to work with compatible O-ring harnesses. This exact Stag Standard listing is SKU 47473; the maker model is BL-16423.
Published size, material, and features
- Total length: approximately 7 inches / 17.78 cm.
- Insertable length: approximately 5.5 inches / 13.97 cm.
- Maximum width: approximately 1.5 inches / 3.81 cm.
- Material: nonporous PVC.
- Design: hand-sculpted realistic details with a soft feel.
- Base: suction cup; manufacturer describes it as harness compatible.
- Manufacturer exclusions: no fragrances, phthalates, paraffins, or latex.
- Power: none; there is no motor, battery, app, remote, or charger.
Always compare insertable length and width rather than relying on “7-inch” in the name alone. The total length includes the external base and sculpted balls, so the published 5.5-inch insertable measurement is the more useful depth comparison. The 1.5-inch width indicates fullness at the widest point, not the diameter along every part of the shaft.
Where the Pool Boy sits in the range
The Pool Boy is the shorter of the two Coverboy products in this wave. Customers wanting the same published 1.5-inch width with more available depth can compare the Coverboy Soldier Boy. The Coverboy Manny the Fireman keeps a seven-inch total length but has a fuller published profile. For another seven-inch realistic design with a different tone and shape, compare Fantasy Jock Wrestling Wayne.
Measurements help narrow choices but cannot predict comfort. Firmness, temperature, lubricant, body position, angle, experience, and the pace of insertion all affect how a product feels. Read how to read dildo measurements and how to choose a dildo before deciding.
Hands-free, harness, and anal-use checks
For suction use, clean and dry both the base and a smooth, nonporous mounting surface. Press down firmly and test the hold by pulling from several angles before body contact. Tile seams, textured walls, porous stone, painted surfaces, and flexible furniture can weaken suction. Recheck the seal whenever position or direction changes, and never assume a suction cup cannot release unexpectedly.
For a strap-on harness, measure the product where it will pass through the O-ring and confirm the external base cannot pull through. The harness should support the base without folding it sharply or cutting into the PVC. Tighten the harness only enough to control movement and keep a hand available until the fit is proven. Browse harnesses and shared-play gear and read the harness selection guide.
For anal use, the suction cup and sculpted base must remain fully outside the body. Inspect the base before every session and do not use the product internally if the base is torn, softened, deformed, or small enough to pass inward in the intended position. Begin slowly with generous lubricant, keep the base reachable, avoid forceful depth, and stop for sharp pain, bleeding, numbness, or unusual resistance.
Lubricant and barriers
Water-based lubricant is the simplest default for PVC and is compatible with most condoms and barriers. If considering silicone- or oil-based lubricant, check the received Blush instructions and every barrier used in the same session; oil can weaken latex barriers, and formulas may interact differently with soft materials. Patch-test on the base when instructions allow and stop if the surface becomes tacky, swollen, cracked, discolored, or odorous.
Use a new condom over the toy when sharing between people or body sites, and replace the barrier before moving from anal use to another body site. A barrier reduces contact but does not replace cleaning. Avoid numbing products because they can conceal pain or excessive pressure.
Cleaning and storage
Wash before first use and after every session according to the received manufacturer directions. A conservative routine is warm water, mild unscented soap, thorough rinsing, and complete air-drying. Do not boil, bleach, dishwasher-clean, or use alcohol, solvents, abrasives, or extreme heat unless Blush expressly permits the method for this exact PVC formula.
Store the fully dry product away from direct sun, heat, dust, dyes, sharp objects, and prolonged contact with other soft toys. A separate lint-free pouch helps prevent material transfer. Review materials and care, the cleaning and storage guide, the hygiene-sensitive return policy, or browse more dildos.