Coverboy Manny the Fireman keeps a moderate published 5.5-inch insertable length while increasing maximum width to 1.75 inches. That makes it the fuller Coverboy comparison for shoppers who want more girth without moving to an extra-long shaft. Its broad suction base supports hands-free positioning and compatible harness use. This exact Stag Standard listing is SKU 53303; the maker model is BL-16513.
Published size, material, and features
- Total length: approximately 7 inches / 17.78 cm.
- Insertable length: approximately 5.5 inches / 13.97 cm.
- Maximum width: approximately 1.75 inches / 4.45 cm.
- Material: nonporous PVC with a soft realistic feel.
- Base: suction cup; manufacturer describes it as harness compatible.
- Manufacturer exclusions: no fragrances, phthalates, paraffins, or latex.
- Power: none; there is no battery, motor, remote, app, or charger.
Width is the key distinction. The total seven-inch length includes the external base and sculpted balls, while 5.5 inches is the published usable depth. The 1.75-inch widest point is roughly 17 percent wider than a 1.5-inch model, but circumference and perceived fullness rise more quickly than that percentage suggests.
Compare other realistic sizes
For the same published total and insertable lengths with a slimmer 1.5-inch width, compare the Coverboy Pool Boy. For more length at that slimmer width, see the curved Coverboy Soldier Boy. The Fantasy Jock Wrestling Wayne provides another seven-inch realistic comparison with a different shape.
Choose from measurements rather than labels such as “fuller” or “average.” Firmness, angle, lubricant, body position, experience, and insertion pace all change how a width feels. Read how to read dildo measurements and how to choose a dildo before ordering.
Preparation for a wider profile
- Inspect the shaft and base for tears, tackiness, cracks, deformation, discoloration, or a new odor.
- Wash and dry the product according to the received Blush directions.
- Use generous compatible lubricant and begin with external contact or a smaller familiar product if needed.
- Insert slowly without forcing the widest section. Pause whenever the body tightens and add lubricant before friction increases.
- Keep the broad base fully outside and reachable during anal use.
- Stop for sharp pain, bleeding, numbness, loss of sensation, or unusual resistance.
Do not use numbing products to conceal discomfort. A wider product should not be treated as a test to complete. If the 1.75-inch measurement exceeds a comfortable, previously known range, select a slimmer option rather than relying on force or extended pressure.
Suction and harness setup
For suction use, clean and dry the base and a smooth, nonporous mounting surface. Press down firmly, then pull from several angles before body contact. Grout, texture, porous stone, paint, and flexible furniture can weaken the seal. Recheck suction after every position change and plan for an unexpected release.
For harness use, measure the shaft where it passes through the O-ring and confirm the external base cannot pull through. The ring should stabilize the toy without cutting into or sharply folding the PVC. Test the loaded harness outside the body and tighten only enough for control. Browse harnesses and shared-play gear or read the harness selection guide.
Lubricant, barriers, and care
Water-based lubricant is the simplest default for PVC and most barrier materials. Check the received instructions before using silicone- or oil-based formulas; oil can weaken latex, and unfamiliar formulas should be patch-tested on the base when permitted. Stop if the surface becomes sticky, swollen, brittle, or discolored.
When sharing between people or body sites, cover the clean product with a new condom and replace it before switching. A barrier does not replace cleaning. Wash before first use and after each session using the maker-approved method; a conservative routine is warm water, mild unscented soap, thorough rinsing, and complete air-drying. Do not boil, bleach, dishwasher-clean, or use solvents or abrasives unless Blush expressly permits it for this PVC.
Store fully dry and separate from other soft toys, heat, sunlight, dyes, dust, and sharp objects. Review materials and care, the cleaning guide, the hygiene-sensitive return policy, or browse more dildos.