Coverboy Soldier Boy is a curved realistic dildo that adds length without increasing the published 1.5-inch maximum width of the shorter Pool Boy. Its suction-cup base supports hands-free positioning on an appropriate surface and is designed for compatible harness use. This exact Stag Standard listing is SKU 51547; the maker model is BL-16493.
Published size, material, and features
- Total length: approximately 8 inches / 20.32 cm.
- Insertable length: approximately 7.25 inches / 18.42 cm.
- Maximum width: approximately 1.5 inches / 3.81 cm.
- Profile: curved, realistic shaft with sculpted balls.
- Material: nonporous PVC.
- Base: suction cup; manufacturer describes it as harness compatible.
- Manufacturer exclusions: no synthetic fragrance, phthalates, paraffins, or latex.
- Power: none; there is no motor, battery, remote, app, or charger.
The 7.25-inch insertable figure is a maximum published dimension, not a target. The curve changes how the shaft applies pressure, and the external base still needs to remain outside the body. Start with less depth than the product allows and use small angle changes rather than assuming the full insertable length will be comfortable.
Compare length, width, and shape
The Coverboy Pool Boy shares the same published 1.5-inch width but has a shorter 5.5-inch insertable length. That makes the comparison primarily about usable depth and curve rather than a jump in girth. The Coverboy Manny the Fireman offers a shorter but fuller alternative. For a different eight-inch realistic profile, compare the Together Tones 8-inch dildo.
Product names do not establish fit. Compare the widest shaft measurement, insertable length, base size, flexibility, and curve. A 1.5-inch width can still feel substantial when the product is firm, angled, or moving against a sensitive spot. Use the measurement guide and the dildo selection guide before ordering.
Using the curve deliberately
Identify the direction of the curve while the toy is outside the body. Insert slowly with generous lubricant and rotate only through small, controlled changes. A curve can create more focused pressure than a straight shaft, so never force it against resistance or use deep rapid thrusting merely because the overall width appears moderate. Stop for sharp pain, bleeding, numbness, loss of sensation, or persistent discomfort.
For anal use, keep the suction cup and sculpted base fully outside and reachable. Inspect the entire base before every session. Do not use the product internally if the base is torn, softened, distorted, or able to pass inward in the intended position. Never sit, kneel, or place uncontrolled body weight onto a mounted toy.
Suction and harness setup
Clean and dry the suction cup and a smooth, nonporous mounting surface. Press the base down firmly, pull from several directions, and repeat the test after changing the angle. Grout lines, textured tile, porous stone, fabric, and flexible surfaces can break the seal. Keep one hand available until the hold is proven, and plan for the possibility that suction may release.
For harness use, measure the shaft where it will pass through the O-ring and verify that the external base cannot pull through. The ring should stabilize the toy without slicing into or sharply folding the PVC. Adjust the harness for control rather than maximum tightness, then test it outside the body. Browse harnesses and shared-play products and read how to choose a strap-on harness.
Lubricant, barriers, and sharing
Water-based lubricant is the most conservative default for PVC and works with most condom materials. Before using silicone- or oil-based lubricant, check the instructions packaged with this exact product and any barrier in use. Oil can weaken latex, and unfamiliar formulas should be patch-tested on the base if the manufacturer permits it. Discontinue use if the surface becomes sticky, swollen, brittle, discolored, or develops a new odor.
When sharing between people or body sites, cover the clean toy with a new condom and replace it before changing users or locations. A barrier does not replace washing. Avoid numbing lubricant or desensitizing products because they can hide the pain that should signal a change in depth, angle, or speed.
Cleaning and storage
Clean before first use and after every session according to the received Blush instructions. A conservative routine is warm water and mild unscented soap, followed by thorough rinsing and complete air-drying. Do not boil, bleach, dishwasher-clean, use solvents or abrasives, or expose the PVC to extreme heat unless the maker expressly approves that method for this model.
Store the fully dry Soldier Boy by itself in a clean lint-free pouch, away from sunlight, heat, dust, sharp edges, and prolonged contact with other soft materials. Review materials and care, the cleaning guide, the hygiene-sensitive return policy, or browse the full dildo collection.