Au Naturel Jack in beige combines a soft Sensa Feel dual-density TPE exterior with Blush’s bendable FlexiShaft internal structure. It measures 7.5 inches overall, with a published 7-inch insertable length and 1.5-inch maximum width. The suction-cup base supports hands-free mounting and compatible harness use. This exact Stag Standard listing is SKU 74559; the beige maker model is BL-12723.
Published dimensions and construction
- Total length: approximately 7.5 inches / 19.05 cm.
- Insertable length: approximately 7 inches / 17.78 cm.
- Maximum width: approximately 1.5 inches / 3.81 cm.
- Published circumference: approximately 4.75 inches / 12.07 cm.
- Material: Sensa Feel dual-density TPE with a softer outer layer and firmer inner support.
- Structure: FlexiShaft bendable internal spine.
- Base: suction cup; manufacturer describes it as harness compatible.
- Power: none; no motor, battery, app, remote, or charger.
- Manufacturer warranty: none listed by Blush for this model.
The 7.5-inch name is the total measurement, while seven inches is the published usable shaft length. The external base must remain outside and reachable during anal use. The 1.5-inch width and 4.75-inch circumference are more useful fit comparisons than the length alone.
What posable and dual density mean
Dual-density construction pairs a softer contact layer with firmer inner support. FlexiShaft allows the shaft to bend and retain a selected curve while remaining erect. It does not make every angle safe, eliminate depth control, or turn the product into a medical device.
Bend the clean shaft gently outside the body. Avoid repeated sharp folds at one point, twisting against the inner structure, or reshaping while inserted. Inspect the entire shaft before each session for a permanent kink, exposed core, tear, thinning outer layer, tackiness, or an unusual change in firmness.
Compare length, firmness, and features
For more total length and a sculpted base, compare Au Naturel Mister Perfect. For a straight seven-inch product without an internal spine, compare the slimmer-feeling Coverboy Pool Boy. For powered movement, see the fuller Dr. Skin Dr. Murphy.
Read how to read dildo measurements and how to choose a dildo. Choose from known comfortable dimensions instead of assuming that a flexible shaft automatically feels smaller.
Preparation and controlled insertion
- Wash, rinse, and dry the product according to the included Blush directions.
- Select a mild curve outside the body; do not exceed the shaft’s natural range.
- Apply generous water-based or maker-approved hybrid lubricant.
- Insert slowly with the base and a removal grip fully outside.
- Begin with less than the available seven-inch depth and advance only while comfort remains stable.
- Stop for sharp pain, bleeding, numbness, unusual resistance, exposed structure, or a sudden material change.
Do not use numbing products or force a chosen curve against the body. If the shaft changes direction during use, withdraw, inspect it, and reset the bend outside the body.
Suction and harness checks
For suction use, clean and dry the base and a smooth, nonporous mounting surface. Press firmly and test the seal by pulling from several directions before body contact. Texture, grout, porous stone, paint, and flexible furniture can weaken the hold. Recheck after every position change and plan for an unexpected release.
For harness use, measure the shaft where it passes through the O-ring. The ring should stabilize Jack without cutting into the TPE or sharply folding the inner spine, and the full base must remain too wide to pull through. Test the loaded harness outside the body. Browse harnesses and shared-play gear and read the strap-on harness guide.
Porous TPE, barriers, and lubricant
TPE is porous and cannot be sterilized like solid stainless steel. Blush identifies Jack as compatible with water- and hybrid-based lubricants. Water-based lubricant is the simplest default. Patch-test an unfamiliar formula on the base and stop if the surface becomes swollen, sticky, brittle, discolored, or develops a new odor.
Use a new condom when sharing between people or body sites, and replace it before switching. A barrier reduces direct contact but does not make porous TPE sterile or replace cleaning.
Cleaning, drying, and storage
Blush directs washing with warm soap and water or a compatible toy cleaner before and after use, then patting dry with a soft towel. Let the texture and suction base air-dry completely. Do not boil, bleach, dishwasher-clean, use solvents or abrasives, or expose the TPE to extreme heat.
The maker suggests toy renewal powder; use only a product and amount approved for this exact TPE after it is fully clean and dry. Store Jack alone in a lint-free pouch away from other soft toys, heat, sunlight, dust, dyes, and sharp objects. Review materials and care, the cleaning guide, the hygiene-sensitive return policy, or browse more dildos.