Pumped Elite Pump with PSI Gauge – Black is a manual vacuum pump with a pistol grip, on-cylinder pressure gauge, manual quick-release valve, smooth silicone entry sleeve, and included silicone ring. The gauge lets you observe pressure; it is not a target and the current maker page does not verify an automatic vacuum limiter.
Verified product details
- Store SKU: SHTPMP045BLK.
- Maker model: PMP045BLK.
- UPC/EAN: 8714273504746.
- Operation: manual plastic pistol-grip pump with gauge and manual quick-release valve.
- Materials: the maker lists ABS and silicone.
- Cylinder length: 9 inches; inner diameter: 2.17 inches.
- Overall product dimensions: 9.65 × 2.56 × 2.56 inches; insertable length: 8.27 inches.
- Hose length: 10 inches; product weight: 10.23 ounces.
- Package components shown by the maker: silicone sleeve, cylinder, measuring point, pistol-grip pump, release button, pressure gauge, and silicone ring.
The 2.56-inch figure is the product’s outer diameter, while 2.17 inches is the usable inner diameter. The 9-inch cylinder length and 9.65-inch overall product length describe different measurements. This is the black version. The maker describes it as water-resistant; that does not mean waterproof or suitable for immersion.
Fit and setup
- Read the received manual and package directions before use. Inspect the cylinder, sleeve, hose, seals, release valve, gauge, grip, and ring. Do not use cracked, split, loose, kinked, cloudy, sticky, swollen, leaking, or otherwise damaged parts.
- Confirm that the 2.17-inch inner diameter allows comfortable entry without forcing. Lubricate the opening only with a lubricant compatible with silicone and every material involved.
- Seat the sleeve and hose securely, keep the release control reachable, and make sure the gauge is visible. Begin with the lowest effective vacuum and increase gradually only as the manual permits.
- Stop immediately for pain, discomfort, bruising, pinpoint red spots, numbness, coldness, unusual discoloration, swelling that does not quickly resolve, or loss of normal sensation. Use the release valve to remove the vacuum before withdrawing.
Do not invent a pressure target or session time from the gauge face. Follow the exact limits in the received manual. Never sleep with the device on or use it while impaired. The included silicone ring is a separate component; if used, follow its instructions and time limits, ensure it can be removed quickly, and do not combine it with the pump unless the manual expressly directs that sequence.
Medical and outcome boundaries
A vacuum pump can create temporary engorgement, but pumps are not proven to permanently enlarge the penis. This page does not promise erection treatment, permanent growth, testosterone changes, delayed ejaculation, recovery after surgery, or any other medical outcome.
Talk with a qualified clinician before use if you take blood-thinning medicine, have a bleeding or blood disorder, sickle cell disease, reduced sensation, circulation concerns, a penile condition or injury, or want to use a pump for erectile dysfunction or after surgery. A pressure gauge and manual release are not the same as an automatic vacuum limiter.
Cleaning and storage
Follow the product manual first. Release all vacuum, disconnect only the parts the manual says are removable, and keep the pump grip and gauge dry unless the instructions expressly permit otherwise. Clean the cylinder, sleeve, ring, and hose only by the methods approved for each component. Rinse away cleaner where directed, then let every part dry completely before reassembly or storage.
Store the clean, dry device without kinking the hose or compressing the sleeve and seals. Protect the gauge and cylinder from impact, heat, direct sunlight, and sharp objects. Reinspect the hose, seals, valve, gauge, sleeve, ring, and cylinder before every use and retire damaged components.
Browse more Shots America products, compare pumps and extenders, review how to use a penis pump safely, and check the penis-pump cylinder sizing and fit guide.
