The Pumped Classic Penis Pump is a manual squeeze-bulb vacuum pump from Shots America LLC. The exact manufacturer and supplier records identify an ABS cylinder, silicone entry sleeve, 10-inch hose, and quick-release valve, with Black, Blue, Red, and Clear options.
Verified product details
- Brand / manufacturer: Shots America LLC
- Collection: Pumped
- Operation: manual squeeze-bulb vacuum pump
- Materials: ABS and silicone
- Entry sleeve: silicone
- Published cylinder length: 9 inches / 23 cm in the manufacturer narrative
- Published cylinder diameter: 2.35 inches / 6 cm in the manufacturer narrative
- Published inner diameter: 2.17 inches in the manufacturer specification table
- Hose length: 10 inches / 25 cm
- Pressure control: handheld squeeze bulb
- Release: quick-release valve
- Power: none
Color and identifier guide
| Color | Store variation SKU | Supplier SKU | Manufacturer part number | UPC / GTIN |
|---|---|---|---|---|
| Black | NAL-64424 | 64424 | PMP001BLK | 8714273291400 |
| Blue | NAL-64425 | 64425 | PMP001BLU | 8714273291394 |
| Red | NAL-64426 | 64426 | PMP001RED | 8714273291325 |
| Clear | NAL-64427 | 64427 | PMP001TRA | 8714273291318 |
Specification note: the same manufacturer page describes a 9-inch cylinder in its narrative but lists overall product dimensions of 8.07 × 2.36 × 2.36 inches in its specification table. Those fields are not treated as interchangeable. Use the published 2.17-inch inner diameter for preliminary comparison only, and compare the received unit and its enclosed instructions before relying on any measurement for fit.
Included-item limit: the exact records identify the cylinder, silicone entry sleeve, hose, handheld squeeze bulb, and quick-release valve. They do not list a pressure gauge, vacuum limiter, constriction band, storage case, or medical-device certification. Do not assume an unlisted component or certification is included.
Setup and gradual pressure
- Read the instructions supplied with the received product. Before each use, inspect the cylinder, sleeve, hose, squeeze bulb, and release valve, then confirm that the release works before creating a seal.
- Use a small amount of water-soluble lubricant around the opening if the received instructions allow it. MedlinePlus advises against petroleum jelly because it may damage a vacuum device.
- Center the cylinder without trapping or pinching skin. Keep the release valve immediately reachable throughout use.
- Squeeze the bulb gradually. Use only the amount of pressure needed for the intended temporary effect; more pressure is not better. Release pressure immediately for pain, increasing discomfort, or an unexpected change in sensation.
- Use the quick-release valve to remove vacuum before taking the cylinder off. Never pull a sealed cylinder away from the body.
Safety and expectation boundaries
- This model does not document a gauge or vacuum limiter. Without those controls, the exact pressure cannot be read or confirmed, so use especially conservative, gradual pressure and never rely on sensation alone to estimate vacuum level.
- Stop use and allow recovery for pain, serious bruising, blood blisters, decreased sensation, numbness, coldness, marked discoloration, bleeding, swelling that does not resolve, or any injury concern. Seek medical care for severe or persistent symptoms.
- Ask a qualified clinician before use if you take blood-thinning medicine, have a blood or bleeding disorder, reduced genital sensation or circulation, a condition that may cause priapism, a recent genital procedure or injury, or have been advised to avoid sexual activity.
- Do not use while asleep, impaired, unable to operate the release valve, or unable to monitor pressure and sensation continuously.
- A vacuum pump can cause a temporary change while vacuum is applied. It is not evidence of permanent enlargement; MedlinePlus states that vacuum-device use will not increase penis size over time.
- This retail product page does not diagnose or treat erectile dysfunction and does not establish that this model is appropriate for medical therapy or post-surgical rehabilitation. Ask a clinician for device selection and instructions if your goal is medical.
- If using a separate constriction ring, follow that product’s fit, removal, and timing instructions. This pump’s instructions do not establish a safe wear time for a separate ring.
Cleaning, inspection, and storage
- Follow the received instructions for disassembly and cleaning. Do not submerge the squeeze bulb, hose, or valve unless the manufacturer instructions expressly permit it.
- Use a cleaner compatible with both ABS and silicone. Rinse only the components the instructions identify as washable, remove residue, and let every cleaned part dry fully before reassembly or storage.
- Before and after use, inspect for cracks, clouding, rough edges, a loose or split hose, sleeve tears, a sticking valve, bulb damage, or a seal that no longer releases predictably. Retire the product if safe pressure release or structural integrity is uncertain.
- Store clean, dry, unsealed, and away from heat, direct sun, sharp objects, and materials that may react with the silicone sleeve.
Compare the Shots America LLC collection, browse pumps and extenders, read how to choose a penis pump, follow the beginner pump-use guide, compare the cylinder sizing and fit guide, review materials and care, or check the returns, refunds, and hygiene policy.
