The Blush Performance VX10 is a rechargeable automatic penis pump with an airtight clear cylinder, saved-pressure memory, an LCD time-and-kPa display, push-button controls, and a dedicated pressure-release valve. It is designed for controlled vacuum use—not permanent enlargement—and its published exterior measurements do not automatically establish the internal fit.
Verified product facts
- Store SKU: NAL-72869
- Maker number: BL-01209
- UPC: 850002870299
- Brand and model: Blush Performance VX10
- Operation: rechargeable automatic pump with push-button controls
- Pressure features: saved-setting memory, digital time and kPa display, and quick pressure release
- Cylinder: crystal-clear airtight cylinder with etched measurement markers
- Published dimensions: 11.75-inch overall length; 8.75-inch cylinder length; 2.75-inch cylinder width
- Maker-listed usable field: 8.5 inches
- Materials: ABS and silicone
- Power: rechargeable; charging cable included; maker-listed runtime up to 50 minutes
- Included: instruction manual and Stay Hard Donut cock ring
- Warranty: maker-listed one year
The maker title and cylinder description identify the model as Clear, while a separate maker color field says Black. This page follows the exact store SKU, title, and clear-cylinder identity without treating that conflicting field as a separate color specification. The published 2.75-inch cylinder width is not labeled as the internal usable diameter, and the maker’s 7.54-inch circumference field is not labeled as internal circumference. Do not use either number alone as proof of fit. Start with the penis-pump cylinder sizing guide and girth-to-diameter chart.
How to compare this pump
Automatic pumping and memory can make a preferred setting easier to repeat, but a saved setting is not automatically appropriate every day. Body condition, sleeve seal, lubricant, position, and cylinder fit can change the pressure response. Compare the VX10 with the penis-pump selection guide and the current pumps and extenders collection.
The digital kPa display is a measurement aid, not a medical diagnosis or a reason to chase a higher number. Use the lowest effective setting, increase only in small steps if the supplied instructions permit it, and keep the pressure-release control accessible. Never disable, cover, or depend on software memory instead of direct body feedback.
Preparation and a first controlled trial
- Read the exact supplied manual before charging or use. Confirm the charging cable and contacts are dry and undamaged.
- Inspect the cylinder, silicone sleeve, seal, controls, pressure-release valve, cable, and included ring. Do not use damaged, cracked, swollen, permanently deformed, sticky, corroded, or unreliable parts.
- Measure first. Confirm that your current erect length and girth are compatible with the product’s actual internal cylinder space rather than its outside width.
- Use a small amount of compatible water-based lubricant around the sleeve opening to support a seal without flooding the pump or controls. See the water-based lubricant guide.
- Seat the sleeve gently, begin at the lowest setting, and use a short trial. Keep one hand able to reach the release valve at all times.
- Release the vacuum fully before removing the cylinder. Never pull against active suction.
Stop immediately for pain, pinching, numbness, coldness, marked or uneven discoloration, bruising, blistering, bleeding, loss of sensation, or swelling that does not settle after release. Do not sleep with the pump attached, leave it running unattended, use it while impaired, or use it over injured or infected skin. Do not treat discomfort as a training step. Read the full step-by-step pump safety guide.
If you have a bleeding disorder, take blood-thinning medication, have reduced genital sensation or circulation, have a history of priapism, sickle-cell disease, penile injury or curvature, or are recovering from pelvic or genital surgery, ask a qualified clinician whether vacuum use is appropriate for you. Seek prompt medical care for severe pain, uncontrolled bleeding, a significant injury, or an erection that will not resolve.
Included ring and circulation
The included Stay Hard Donut is a separate constriction accessory. Use it only if the exact instructions explain when and how to apply it. Do not use the ring to trap pressure inside the cylinder, and do not assume the included size fits every body. Remove it immediately for numbness, coldness, increasing pain, pronounced discoloration, or swelling. Keep track of wear time and never sleep while wearing it.
Cleaning, charging, and storage
Follow the exact manual’s water-resistance limit. A retained supplier record calls this model IPX7, but the current exact maker page does not repeat that rating, so this page does not direct customers to submerge the assembled device. Clean only as the supplied instructions allow. For routine exterior care, use mild unscented soap and water or compatible toy cleaner on permitted surfaces, avoid saturating the controls or charging contacts, and dry every part completely before charging or storage.
Use water-based lubricant with the silicone sleeve unless the exact instructions approve another formula. Avoid silicone lubricant on silicone parts unless compatibility is expressly confirmed. The materials and care hub and cleaning and storage guide explain patch testing, drying, inspection, and replacement decisions.
Store the pump depressurized, fully dry, and protected from heat, direct sunlight, sharp objects, lint, and crushing. Keep the cable with the pump, prevent metal objects from bridging the charging contacts, and recharge before long storage only as the manual directs. When traveling, secure the controls against accidental activation and follow current battery rules; see how to travel with sex toys. Review the returns, refunds, and hygiene policy before opening an intimate product.
