Nexus Thrust Prostate Edition combines powered in-and-out movement with a separate vibrating perineum section. The toy and its slim wireless remote are rechargeable, letting the wearer or a partner control three thrusting modes and six vibration modes. This exact Stag Standard listing is SKU 87910.
Published specifications
- Insertable length: 10 cm / approximately 3.94 inches.
- Maximum shaft width: 3.5 cm / approximately 1.38 inches.
- Thrusting settings: three.
- Perineum vibration settings: six.
- Material: silicone shaft.
- Control: onboard controls and slim wireless remote.
- Published remote range: up to 8 metres under suitable conditions.
- Power: rechargeable toy and rechargeable remote.
- Water protection: the current maker page describes both toy and remote as waterproof/submersible; the current store record identifies IPX7.
- Current store runtime statement: approximately one hour after a three-hour charge.
Published measurements are comparison points, not a promise of fit. The shaft’s powered movement changes pressure and effective depth during operation. Begin with the motor off, confirm the resting size and angle are comfortable, and leave room for the full motion before selecting a thrust setting.
How the two functions differ
The insertable shaft provides three thrusting speeds. The external section rests toward the perineum and provides six vibration modes. The two functions can be used together or separately, which makes it easier to identify which movement is comfortable. Test every button while the product is outside the body and begin with one function at its lowest setting.
Compare the simultaneous rotating and vertical movement of the Nexus Ascend, app control on the Nexus Revo Stealth, the flexible dual-arm design of the Lovense Edge 2, or the nonpowered Aneros Helix Trident.
Placement and powered-motion safety
- Charge and test the toy outside the body. Verify that every function starts, changes, and stops normally.
- Inspect the silicone, moving junction, controls, and charging areas for tears, gaps, swelling, or exposed components.
- Apply water-based lubricant to the insertable shaft and body opening without flooding controls or charging contacts.
- Insert with the motors off, align the curve gently, and position the external section without compressing the perineum.
- Start at the lowest thrusting speed. Maintain access to the stop control and do not push against the motor’s movement.
- Stop for sharp pain, bleeding, numbness, unusual pressure, motor stalling, loss of sensation, or difficulty removing the product.
Do not trap the moving shaft under body weight or use the device in a position where a sudden movement would drive it deeper. Never force a stalled mechanism, and do not continue because the vibration masks discomfort. The product is for pleasure, not diagnosis or treatment of a prostate or pelvic condition.
Remote control and consent
The published eight-metre range is a maximum under suitable conditions; walls, interference, body position, and battery level can reduce it. Pair and test the remote before use. If a partner controls the toy, agree on settings, a clear stop signal, and what happens if the connection drops. The wearer should always retain immediate access to the onboard stop control or a safe removal path.
Remote control never replaces consent or check-ins. Do not leave a running internal toy unattended, and do not use it on a sleeping or impaired person. Read our guide to using toys with a partner.
Charging and water-rating boundaries
Use only the supplied charging equipment and an allowed power source. Charge the toy and remote on a dry, stable, ventilated surface away from sinks, tubs, bedding, heat, and direct sun. Both components must be completely dry before charging. Stop use if either becomes unusually hot, swollen, cracked, corroded, leaking, or odorous.
Follow the received manual’s exact IPX7 immersion depth, time, and charging-contact instructions. A waterproof claim does not permit charging near water or using a damaged seal. If the received instructions differ from a retailer description, follow the more specific manufacturer instructions.
Cleaning and storage
Switch off both components and disconnect charging. Wash the toy and remote only as the current Nexus instructions permit, using warm water and mild unscented soap or a compatible cleaner. Pay attention to the moving shaft junction, external contact surface, and seams without pulling on the mechanism. Do not boil, bleach, dishwasher-clean, or use abrasives or solvents.
Rinse as directed, dry all surfaces and recesses completely, and store the toy where the shaft is not bent or compressed. Keep the remote and charging cable together but prevent metal contacts from rubbing against the silicone.
Browse prostate toys, read materials and care and the cleaning guide, review returns and hygiene, or return to the full shop.