Creature Cocks Space Cock Silicone Alien Dildo – Glow in the Dark

$74.99

Manual, non-powered glow-in-the-dark silicone fantasy dildo in orange, purple and blue. It measures 8.5 inches overall, 7.5 inches insertable, and 1.5 to 2.6 inches in listed insertable diameter, with a broad suction base; UPC 848518051400.

Compare the full profile before choosing, keep the base outside the body for anal use, use water-based lubricant only, never force insertion, and clean and dry the textured surface completely after use.

Product facts

Intended use
Fullness or penetration, For Two
Material
Body Safe, Phthalate Free Premium Glow In The Dark Silicone
Firmness
Firm Silicone Core With A Soft, Silky Surface And Wide Suction Cup Base
How it works
Manual
Experience level
Advanced
Solo or partnered
Solo, Partnered, Harness
Insertable or usable length
7.5 in
Maximum diameter
2.6 in
Maximum circumference
8.17 in
Total product length
8.5 in

The Creature Cocks Space Cock is a manual, non-powered fantasy dildo in an orange, purple and blue gradient. Its silicone profile combines a textured head and shaft with a fuller lower section and a broad suction base. The glow treatment charges after exposure to sunshine or ultraviolet light; this page does not promise a fixed brightness or glow duration.

Verified product details

Store SKUXRAH148
Maker item numberAH148
Supplier SKU91003
UPC / GTIN848518051400
OperationManual and non-powered
MaterialSilicone
ColorOrange, purple and blue
Overall length8.5 inches
Insertable length7.5 inches
Insertable diameter1.5 inches at the narrowest listed point; 2.6 inches at the widest listed point
BaseBroad suction base; maker describes compatibility with most strap-on harnesses
LubricantWater-based lubricant only

Profile note: compare the complete insertable shape, not only the narrowest point. The maker-listed 2.6-inch widest diameter is substantial. A 2.6-inch circle has an approximately 8.17-inch circumference by calculation, not as a separate maker measurement. Use the dildo selection guide and measurement guide to compare this profile with products you already use comfortably.

Before use

  1. Read and keep the directions received with the product. They control if they differ from this page.
  2. Inspect the silicone and base under good light. Do not use the product if it has tears, cracks, sharp nicks, unusual tackiness, discoloration, separation or another change that cleaning does not remove.
  3. Plan around the 2.6-inch widest point. Progress gradually, use plenty of water-based lubricant and never force the product.
  4. Keep the broad base outside the body during anal use. The base is the retrieval stop and should remain visible and reachable.

For suction use, choose a clean, dry, smooth, nonporous surface. Press the base down, test the hold by hand and recheck it during use. Suction varies by surface and movement; it is not guaranteed and should not be treated as load-bearing. “Compatible with most strap-on harnesses” is not universal-fit language. Harness fit depends on the opening, support and base geometry, so compare measurements before use. Browse the dildo collection, Creature Cocks collection, fantasy and kink products, harness-compatible products and suction-base products only after comparing the actual product profile.

Stop immediately for pain, numbness, coldness, loss of sensation, bleeding, pronounced swelling or marked color change. If the product becomes retained, or symptoms persist after removal, seek urgent medical care.

Glow, lubricant and sharing boundaries

  • Expose the product to sunshine or UV light to charge the glow effect. Avoid prolonged heat and direct-sun storage.
  • Use water-based lubricant only. Do not substitute silicone, oil or an unlabeled household product.
  • If sharing, use a new compatible barrier for each person and each body opening. Replace the barrier if it tears or is moved between openings.
  • The stored 1.1-pound WooCommerce value and the archived 1.12-pound supplier value are shipping records, not claims about usable or insertable weight.

Cleaning, drying and storage

  1. Clean before first use and promptly after every use with warm water and mild soap or a compatible toy cleaner, following the received directions.
  2. Rinse away visible cleanser and lubricant residue. Pay attention to textured areas and the junction between the shaft and base.
  3. Wipe and air-dry completely before storage. Store in a cool, dark, dry place away from direct sunlight, sharp objects, dust and prolonged contact with other soft materials.
  4. Inspect again after cleaning. Retire the product if damage, persistent odor, surface breakdown or an unremovable change develops.

Do not claim the product is sterilized, boil it, place it in a dishwasher, or use bleach, solvents or household disinfectants unless the received manufacturer directions expressly authorize that method. See the materials and care guide for a repeatable routine.

Orders use discreet outer packaging. Review the returns, refunds and hygiene policy before opening an intimate product.