Creature Cocks Hell Hound Squirting Dildo

$63.99

Manual, non-powered red-and-black silicone fantasy dildo with a wide suction base, 32.4-inch tube, up-to-100-mL syringe and up-to-56-mL rubber bulb. It measures 7.8 inches overall, 6.9 inches insertable and 1 to 2.3 inches in listed insertable diameter; UPC 848518060464.

Compare the full profile before choosing, keep the base outside the body, test the fluid system over a sink with plain water, use only manufacturer-compatible body-intended fluids, never force the product, and clean, flush, air-dry and store every component completely.

Product facts

Intended use
Fullness or penetration, For Two
Material
Silicone
Firmness
Firm Yet Flexible
How it works
Manual
Experience level
Advanced
Solo or partnered
Solo, Partnered, Harness
Insertable or usable length
6.9 in
Maximum diameter
2.3 in
Maximum circumference
7.23 in
Total product length
7.8 in

The Creature Cocks Hell Hound is a manual, non-powered fantasy dildo with a separate tube, syringe and bulb for its fluid-delivery system. The maker describes a firm yet flexible red-and-black silicone dildo with a wide suction base. It has no motor, battery, charger, remote or app.

Verified product details

Store SKUXRAH760
Maker item numberAH760
UPC / GTIN848518060464
OperationManual and non-powered
ColorRed and black
MaterialsSilicone dildo; rubber bulb; plastic syringe
Overall length7.8 inches
Insertable length6.9 inches
Insertable diameter1 inch at the narrowest listed point and 2.3 inches at the widest listed point
Tubing length32.4 inches
Fluid componentsSyringe holds up to 100 mL; bulb holds up to 56 mL
BaseWide suction base; maker describes compatibility with most strap-on harnesses

Fit and weight note: “compatible with most” is not a universal-fit promise. Compare the base and harness openings before use. The store's 1-pound WooCommerce value is a shipping record and is not presented as a body measurement. Use the dildo selection guide and dildo measurement guide to compare the 1-to-2.3-inch diameter range with products you already use comfortably.

Before body use

  1. Read and keep the received package directions. They control if they differ from this page.
  2. Inspect the dildo, base, tube, bulb, syringe and every connection. Do not use any part that is torn, cracked, sharply nicked, leaking, unusually tacky, discolored or separating.
  3. Connect the system only as the received instructions direct. Test the assembled system over a sink with plain water before body use, checking for leaks, blocked tubing and loose connections.
  4. Compare the full insertable profile, not only the narrowest point. The 2.3-inch widest point is substantial. Progress gradually, use plenty of compatible lubricant and never force the product.

Keep the wide base outside the body. For suction, start with a clean, dry, smooth, nonporous surface, press the base down and test the hold before body use. Suction varies by surface and is not guaranteed; do not rely on suction alone to prevent movement or retention. Harness compatibility also depends on the harness opening, support and product base. Browse the dildo collection, the Creature Cocks collection or other monster and creature products only after comparing measurements and base design.

Stop immediately for pain, numbness, coldness, loss of sensation, bleeding, pronounced swelling or marked color change. If the product becomes retained, or symptoms persist after removal, seek urgent medical care.

Fluid-system boundaries

  • Use only a body-intended fluid that the received manufacturer directions identify as compatible with the dildo and delivery system. Do not improvise with household mixtures, numbing agents or unknown liquids.
  • Do not inject fluid under pressure into the body. Stop if the tube, syringe or bulb does not move fluid freely.
  • Do not share fluid-contact components between people. Avoid touching container openings with used components, and discard any fluid that may have been contaminated.
  • Flush and clean the tube, bulb and syringe promptly after use according to the received directions. Rinse away residue and air-dry every component completely before storage.

Lubricant, cleaning, and storage

Use water-based lubricant conservatively unless the received directions expressly allow another formula. Patch-test any unfamiliar product on a small exterior area first. The water-based lubricant guide explains label checks.

  1. Clean the dildo before first use and promptly after every use with warm water and a mild compatible cleanser or toy cleaner, following the received directions.
  2. Flush the fluid path until it is visibly free of residue. Clean the syringe and bulb separately when the received directions allow disassembly.
  3. Air-dry the dildo and every fluid-system component completely. Moisture hidden in the tube, bulb or connections can remain after the exterior looks dry.
  4. Store clean, dry components separately in a cool, dark place away from direct sun, heat, dust, sharp objects and prolonged contact with other soft materials.

Do not boil, use a dishwasher, bleach, solvents or household disinfectants, or claim the system is sterilized unless the received manufacturer directions expressly authorize that method. See the materials and care guide and cleaning and storage guide for a repeatable routine.

Orders use discreet outer packaging. Review the returns, refunds, and hygiene policy before opening an intimate product.