The b-Vibe Every Body 6.5-Inch Realistic Strap-On Kit pairs an adjustable padded harness with a rechargeable girthy silicone dildo. It is designed as a coordinated kit rather than a harness-only purchase: the dildo, interchangeable O-rings, and harness are supplied together. The dildo has four steady speeds, six vibration patterns, a gentle curve, and a suction base that allows it to be used with or without the harness.
What comes with the kit
- Vibrating dildo: 6.5 inches total length, approximately 5.5 inches insertable, and 1.56 inches maximum diameter
- Harness: contoured neoprene body with polypropylene webbing, plastic and metal trims, and padded back support
- Fit: adjustable up to a 68-inch waist
- O-rings: three interchangeable silicone rings
- Vibration: 4 speeds and 6 patterns
- Battery: 500 mAh rechargeable battery
- Charging and runtime: about 120 minutes to charge and 60 to 90 minutes of use
- Water resistance: manufacturer lists the powered dildo at IPX7
The harness also has an elastic pouch behind the dildo base pad for an optional bullet vibrator. The bullet is not included. The dildo is silicone over an ABS internal structure, while the harness combines neoprene and webbing with plastic and metal hardware.
Fit and adjustment
Adjust the waist and thigh straps before adding the dildo, then check that the base remains centered and supported. A secure fit limits shifting and lets the wearer guide movement with the hips instead of constantly correcting the harness. The padded back panel distributes tension across a broader area. Read our strap-on harness guide for fit, O-ring compatibility, and adjustment basics.
The dildo’s 1.56-inch maximum diameter is substantial for a first receiver even though the kit is marketed as approachable. Compare actual measurements rather than relying on the word “beginner.” The dildo measurement guide explains diameter, circumference, and insertable length. Use generous water-based lubricant, proceed gradually, and stop if the receiver experiences sharp pain, bleeding, persistent numbness, or unusual resistance.
O-ring and base setup
Select the O-ring that holds the dildo’s base securely without stretching the ring beyond its intended fit. Seat the O-ring flat in the harness opening, pass the dildo through it, and check that the base cannot pull through during ordinary movement. The dildo’s suction base remains behind the O-ring and helps provide a broad contact area; it should not be folded or forced through an undersized ring. Recheck the fit after the wearer stands and moves, because strap tension can change once weight and body position shift. Keep unused O-rings with the kit so they are not confused with rings from another harness. If any ring becomes cracked, permanently stretched, or tacky, replace it rather than relying on a compromised part. The Sportsheets replacement O-ring pack is a comparison option, but compatibility should be confirmed by actual diameter before purchase.
Compare other harness kits
For a smaller manual dildo and lower-complexity setup, compare the b-Vibe Beginner’s 5-Inch Strap-On Harness Set. The b-Vibe Every Body 6-Inch Harness Set offers another coordinated manual option. Shoppers interested in a multi-piece anal progression kit can compare the b-Vibe Strap-It-On Anal Training Kit, while the b-Vibe Curved Vibrating Strap-On Kit provides a different powered profile. Browse the full harnesses and shared-play collection.
Powered use and charging
Charge the dildo fully before first use and keep the charging area dry until the instructions say it is safe to reconnect. Begin at a lower speed so both partners can assess the combination of girth, angle, and vibration. The 60-to-90-minute runtime is approximate and varies with intensity and pattern. The suction base can support hands-free positioning on a clean, smooth surface, but test the seal before applying body weight or movement.
Cleaning the dildo and harness
Remove the dildo and O-ring from the harness before cleaning. Follow the manufacturer’s received instructions for the powered dildo and charging port. Wash the silicone surface with warm water and mild unscented soap or a compatible toy cleaner, rinse, and dry completely. IPX7 describes the powered dildo, not the complete fabric harness. Clean the neoprene harness according to its care directions, protect the hardware from prolonged moisture, and allow every component to dry separately before reassembly or storage.
Use water-based lubricant as the conservative default around silicone components. Our water-based lubricant guide, cleaning and storage guide, and materials and care page cover compatibility and maintenance. Inspect straps, stitching, buckles, O-rings, silicone, controls, and the charging area before every use. Review the returns and hygiene policy before opening an intimate product.