Tenga Spinner DX 03 Steps is a reusable clear manual stroker with a red internal spiral coil and continuous step-like texture. It is non-electronic: the flexible coil expands, contracts, and twists with hand-driven up-and-down movement rather than a motor, battery, app, or remote.
Verified specifications
- Manufacturer model: SPD-003
- Barcode: 4582655746091
- Product dimensions: 5.11 × 2.28 × 2.28 inches
- Product weight: 7.26 ounces
- Materials: Elastomer product; PP, PS, and PE casing
- Texture: Red STEPS pattern with continuous spiral-staircase-like edges
- Power: Manual and non-electronic
- Included: Drying stand/case and one 0.34 fl oz sample of TENGA Lotion Regular
TENGA describes the DX body as larger and its elastomer as 40% thicker than the original Spinner. That is a manufacturer comparison, not an independently measured thickness. The manufacturer also lists reference-fit figures of 9.84 inches for insertion length and 1.96 inches for insertion width, with the warning that actual fit and sensation may vary. Those reference figures are not the product's physical internal dimensions or a universal-fit guarantee.
How the manual spinning action works
- Inspect the opening, elastomer, seam, red coil, and casing. Do not use the product if it is torn, cracked, permanently tacky, or otherwise damaged.
- Apply a compatible water-based lubricant inside the opening and around the insertion point.
- Hold the top, squeeze gently to release trapped air, and insert slowly without force.
- Use controlled up-and-down strokes while maintaining a comfortable grip at the top. Grip and movement influence the twisting action and suction, so begin slowly rather than trying to maximize pressure.
- Stop for pain, numbness, pinching, skin irritation, loss of circulation, or another concerning symptom.
This is a single-user external stroker. Do not share it or use it for vaginal or anal insertion. Compare manual designs in the stroker buyer guide, browse the Strokers & Masturbators collection, or see more from Tenga.
Lubricant compatibility
TENGA recommends TENGA Lotion and says the interior TPE should be compatible with other water-based lotions, while also warning that it does not accept responsibility for damage caused by third-party lubricants. Use TENGA Lotion or another formula whose label confirms water-based compatibility. Do not use oil-based or silicone-based lubricant because the manufacturer warns that either can damage the material.
The included 0.34 fl oz lotion sample is a consumable, not a refillable part of the stroker. Review its ingredient label before use if you have sensitivities, and stop if irritation occurs. Read the water-based lubricant guide or browse Lubricants & Preparation.
Cleaning, drying, and storage
After each use, wash thoroughly with cold or tepid water and pat dry. Do not turn the Spinner DX fully inside out; TENGA warns that full inversion can damage the internal coil. Remove the bottom cover to expose the drying stand/case, place the product in it, and air dry in a well-ventilated area.
Replace the top and bottom covers only after the product is fully dry, then store it in a cool, dry, dark place away from direct sunlight. Do not use alcoholic cleaners or corrosive substances, boil the product, or use a dishwasher unless instructions supplied with the exact item explicitly permit that method. Review the stroker cleaning and drying guide and Materials & Care.
