TENGA Spinner 05 Beads is a reusable manual stroker with a clear elastomer sleeve, an orange internal spiral coil, and varied alternating spheres inside the channel. The spheres are arranged in the opposite direction of the coil, so an up-and-down stroke causes the flexible sleeve to rotate around the internal pattern. This motion is mechanical: the product has no battery, motor, vibration, charging port, app, or remote. Store SKU 75672 corresponds to maker item SPN-005 and GTIN 4570030970971.
Verified product specifications
| Store SKU | 75672 |
|---|---|
| Maker item | SPN-005 |
| UPC / GTIN | 4570030970971 |
| Brand and model | TENGA SPINNER 05 BEADS |
| Product material | Elastomer |
| Casing materials | PP, PS, and PE |
| Published product size | 5.12 × 1.77 × 1.77 inches |
| Published product weight | 4.58 ounces |
| Reference insertion length | 9.84 inches |
| Reference insertion width | 1.96 inches |
| Included lubricant | TENGA Lotion Regular, 0.24 fl oz |
| Power | Manual; no battery or charging |
Measurement note: TENGA presents insertion length and width as reference values and says actual fit and sensation may vary. The 9.84-inch insertion length describes how far the flexible internal channel may accommodate under use; it is not the rigid exterior height. Nalpac previously described the flexible opening as stretching to approximately 2.15 inches, while TENGA’s current official page gives a 1.96-inch reference insertion width. This page uses the current maker figure and does not turn either value into a universal fit promise.
How the spiral motion works
The exact images show a clear, capsule-shaped sleeve held by an orange coil. Inside, alternating spherical details vary in size and direction. When the sleeve expands and moves along the coil, the channel rotates. Holding the closed top, squeezing air out before insertion, and maintaining contact at the top can also change the amount of suction. Both twisting and suction depend on hand position, movement, lubricant, anatomy, and the amount of air released; neither is a powered setting or a guaranteed sensation.
Before use, remove the top cover and take the SPINNER from its case. Remove the protective film and lotion pouch. Inspect the elastomer for tears, punctures, clouding paired with surface damage, exposed coil edges, permanent deformation, or tackiness that remains after cleaning. Do not use a damaged sleeve. Apply lubricant inside the channel and at the insertion point. The included TENGA Lotion Regular is the product-matched option. If using another formula, check its label for elastomer compatibility; a compatible water-based lubricant is the conservative default when compatibility is otherwise uncertain.
Use and fit checklist
- Start with enough compatible lubricant to reduce dragging. Add more if movement becomes dry or uncomfortable rather than forcing the sleeve.
- Hold the product at the top and squeeze gently to release air before insertion. Use slow, short strokes first to evaluate width, pressure, texture, and suction.
- Do not force depth or width. Stop for pain, pinching, abrasion, numbness, unusual swelling, bleeding, skin irritation, or loss of sensation.
- Keep fingers away from damaged coil areas, and do not twist the casing against the sleeve by force. The internal coil should drive the rotation during ordinary stroking.
- During partner use, the receiving person should control speed and depth or be able to stop immediately. Agree on a clear stop signal before starting.
The stroker buyer guide explains closed-end, open-ended, manual, textured, and reusable designs. The partner-use guide covers communication, control, and stopping. Product dimensions and stretch do not determine comfort on their own, so stop if the fit feels overly tight or the opening cannot move without force.
Included lotion and compatibility
The official package includes 0.24 fl oz of TENGA Lotion Regular. TENGA lists water, glycerin, sodium polyacrylate, hydroxyethylcellulose, alcohol, polysorbate 80, sorbitan laurate, disodium EDTA, phenoxyethanol, methylparaben, and fragrance. Anyone sensitive to an ingredient should not use the sample. Stop and wash the skin if burning, persistent redness, itching, or another reaction occurs. Do not assume that oil, silicone, numbing, warming, or flavored formulas are compatible with the elastomer merely because they are sold as personal lubricants.
Cleaning, drying, and storage
- After use, wash the sleeve thoroughly with cold or tepid water. Rinse the full channel until visible lubricant and residue are gone.
- Do not turn the SPINNER fully inside out. TENGA warns that full inversion can damage the internal coil.
- Pat the product dry without twisting or wringing it. Remove the bottom cover to expose the drying case, place the sleeve inside, and leave it in a well-ventilated area.
- Wait until the sleeve and case are completely dry. Then replace the top and bottom covers and store the product in a cool, dry, dark place away from direct sunlight.
- Before the next use, check the sleeve and coil again. Replace the product if there is a tear, puncture, exposed or displaced coil, persistent tackiness, trapped moisture, lasting odor, or deformation that changes the channel.
TENGA does not instruct users to boil, bleach, machine wash, dishwash, sterilize, or fully invert this product. Do not substitute those methods for the published cold-or-tepid-water rinse. The cleaning and storage guide and materials and care hub explain why complete drying, separate storage, and material-specific instructions matter.
Compare related strokers
Browse Strokers and Masturbators or the TENGA brand page. Exact discovery paths include male-focused, manual stroker, Nalpac, reusable, Spinner, and Tenga.
Orders use discreet outer packaging. Review the returns, refunds, and hygiene policy before opening intimate products.
