The TENGA FLEX Bubbly Blue is a reusable manual stroker with a removable elastomer sleeve, smaller internal protrusions, larger tip-focused nubs, a flexible spiral-ribbed casing, adjustable air-hole vacuum and an invertible cap that becomes a drying stand. It has no battery, charging cable, app, motor or vibration function.
Verified identity, size, and controls
| Store SKU | NAL-84829 |
|---|---|
| Maker SKU | FLX-003 |
| UPC | 4570030977345 |
| Color | Bubbly Blue |
| Operation | Manual; squeeze or twist the flexible casing and cover or uncover the air hole to change vacuum |
| Overall product size | 6.5 × 2.91 × 2.91 inches |
| Manufacturer-listed insertion length | 5.5 inches |
| Manufacturer-listed insertion width | 1.77 inches |
| Product weight | 10.9 ounces; this is not a packaged shipping weight |
| Current U.S. material listing | Elastomer and polypropylene (PP) |
| Included lubricant | 0.34 fl oz TENGA Lotion Regular, according to the current U.S. maker page; check the received package |
The maker says its insertion measurements are references and that actual fit and sensation can vary. Do not treat 1.77 inches as a stretch limit or fit guarantee, and never force insertion. Compare fit, control style, cleaning access and texture in the stroker selection guide.
Material-label note: the current U.S. product page lists elastomer and PP, while page 5 of the linked global manual also lists PVC. Regional packaging or revisions may differ. If you avoid a particular material, check the received package or confirm the current U.S. model with TENGA before use. Our materials and care guide explains why exact package labeling controls.
Setup and manual control
- Read the received manual. Inspect the sleeve, opening, air hole, casing and stand cap for tears, cuts, tackiness, deformation or loose parts. Do not use a damaged product or use it on damaged or irritated skin.
- Remove the stand cap. Apply compatible lubricant to the insertion opening and inside the sleeve. The included packet is convenient, but it is not a promise that every ingredient suits every person; review the received label first.
- Insert gradually without forcing. Leave the air hole uncovered for less trapped vacuum, or cover it with a finger to create the maker-described internal vacuum. Keep the air hole reachable so vacuum can be released immediately.
- Squeeze or twist the flexible casing to change pressure and the spiral motion. Start gently and adjust one control at a time.
- Stop immediately for excessive pain, discomfort, numbness, loss of sensation, skin injury, marked discoloration or another adverse effect. Seek medical care for serious or persistent symptoms.
Use only as a handheld stroker. Do not put the product in the mouth, swallow any part, insert the product itself into the body, share it with another person, modify it or expose it to flame or high heat. Reusable describes the intended care cycle; it is not a durability guarantee.
Included lotion and compatibility
The current U.S. maker page lists the included 0.34-fl-oz TENGA Lotion Regular ingredients as water, glycerin, sodium polyacrylate, hydroxyethylcellulose, alcohol, polysorbate 80, sorbitan laurate, disodium EDTA, phenoxyethanol, methylparaben and fragrance. Check the received label because formulas and regional packs can change. Do not use it if you know an ingredient is unsuitable for you, and stop if irritation occurs. The water-based lubricant guide covers label reading and compatibility questions.
Exact cleaning, drying, and storage sequence
- After use, remove the elastomer sleeve and fully invert it gently. The manual directs washing the removable sleeve—not submerging the assembled casing.
- Wash the sleeve inside and out under tepid running water with mild soap until lubricant and fluids are removed. Do not use alcohol, strongly acidic or alkaline cleaners, corrosive solvents, benzine or paint thinner.
- Pat dry with a clean towel or cloth. Invert the stand cap and place the sleeve on it without forcing or stretching the internal details.
- Air-dry and physically confirm that the sleeve is completely dry. A fixed number of hours is not a dryness guarantee.
- Return the sleeve to the casing in the manual’s shown orientation, restore the stand cap to its original form and close the product. Store cool, dry and dark, away from direct sunlight, humidity, sharp objects and high heat.
Do not boil the sleeve, use hot water, leave it in hot or cold water for an extended period, place it in a dishwasher or claim it is sterilized. Read the stroker cleaning and drying guide and the broader cleaning and storage guide.
Compare other options in Strokers and Masturbators, browse the TENGA USA, Inc collection, or view other manual products. Orders use discreet outer packaging; review the returns, refunds, and hygiene policy before opening an intimate product.
