The KinkLab Anal Plug Harness with Cock Ring combines a rear plug keeper with a front rigid ring in one adjustable system designed around male anatomy. Three adjustment points help position the waist and thong straps, while lockable side buckles add an optional restraint element. This exact Stag Standard listing is SKU 76356.
Published fit and component measurements
- Waist range: approximately 28 to 44 inches / 71 to 112 cm.
- Thong-strap range: approximately 16.5 to 19.5 inches / 41.9 to 49.5 cm.
- Plug keeper: approximately 2 inches high, with a published width range of 1 to 2.25 inches.
- Included ring: interchangeable 2-inch steel cock ring.
- Adjustment: three fit points.
- Buckles: lockable side buckles.
These ranges describe the harness, not every body or plug combination. Measure the intended waist position and the path the center strap will follow before ordering. The rear keeper must align with the plug base without pulling the plug inward, and the front ring must fit independently of the waist measurement.
Choose the plug and ring separately
The plug keeper is intended for many average-size plugs, but “fits” does not mean every shape will be retained safely. Compare the keeper’s published dimensions with the widest part of the plug’s external base. The base must remain outside the body, sit flat enough for the keeper to capture it, and stay reachable for removal. A narrow neck alone is not enough if the base can fold, pull through, or rotate into an unsafe position.
For possible plug shapes, compare the Blush Basic Anal Plug, the smaller rigid profile of the njoy Pure Plug Small, or the flexible b-Vibe Dart. Compatibility must be checked from actual base measurements; an internal link is not a promise that a particular plug will fit this keeper.
The included steel ring is rigid and does not stretch. If its two-inch internal opening is not an appropriate fit, do not force it. The interchangeable holder lets an experienced user compare another compatible ring, such as the adjustable KinkLab leather three-snap ring or the flexible sizes in the KinkLab rubber ring set, after confirming attachment and dimensions.
Dry fitting before internal use
- Inspect every strap, edge, rivet, snap, buckle, and ring. Do not use the harness if hardware is loose, corroded, sharp, or cracked.
- Fit the empty harness over clothing first. Center the front and rear sections, then adjust each point without pinching skin or restricting normal movement.
- Test the plug keeper with the clean plug outside the body. Tug gently from multiple angles to confirm that the external base cannot pass through.
- If using a penis ring, size and test that component separately before combining it with the harness. Rigid rings require a conservative fit and a clear removal plan.
- Only after the dry fit is stable should the harness be tested on bare skin, with the plug inserted slowly using generous compatible lubricant.
- Recheck strap tension after standing and changing position. Stop if the harness pulls the plug deeper, twists the base, or shifts the rigid ring.
Locking and circulation safety
Lockable buckles add risk as well as control. Keep every key immediately available, retain a backup release plan, and never lock the harness on someone who is asleep, impaired, unable to communicate, or unable to withdraw consent. Do not leave a wearer unattended. Agree on a clear stop signal before partner play and unlock the harness at the first sign of panic, pinching, loss of sensation, or equipment movement.
A steel penis ring can restrict circulation quickly if the fit is wrong. Stop immediately for pain, increasing swelling, numbness, coldness, unusual color change, or difficulty removing the ring. Never sleep in a rigid ring, use numbing products to hide warning signs, or assume the waist straps make an unsuitable ring safe. Read how to measure for a cock ring and how to choose a ring before use.
Cleaning and storage
Remove the plug and detachable ring before cleaning. Follow the received KinkLab label for the harness material and hardware; do not soak, boil, bleach, machine-wash, or saturate the straps unless the maker expressly permits it. Wipe permitted surfaces with a barely damp cloth, clean the plug and ring according to their own material instructions, then dry every strap, snap, buckle, and metal surface completely.
Store the harness unbuckled or loosely shaped so straps are not creased and metal parts do not scratch one another. Keep keys with the harness but out of children’s reach. Review materials and care, browse harnesses and shared-play gear, compare butt plugs and trainers or cock rings, and review the hygiene-sensitive return policy.