The Heat Tease Cuff Bracelet is a 9-inch bracelet-style accessory made from heat-reactive PU leather and measuring up to 1.5 inches wide. The surface is described as responding to warmth during wear, creating a visible accent without batteries, charging, vibration, or another powered feature. Browse more options in the Kink & Restraint collection or see the Wholesale X Distribution collection.
Verified product details
| Store SKU | WXD975-62 |
|---|---|
| GTIN / UPC | 746092197562 |
| Total length | 9 inches |
| Maximum width | 1.5 inches |
| Material description | Heat-reactive PU leather |
| Power | None; manual accessory |
| Visible hardware | Metal snap hardware is visible in the current product image |
What heat-reactive means here
The product record describes the PU surface as heat-reactive and says that it responds to warmth during wear. That wording does not mean the cuff produces heat. It has no verified heating element, battery, charger, temperature control, warming mode, or powered function. Body warmth or another permitted warm contact may change the surface appearance, but the available record does not establish an exact activation temperature, color range, response time, duration, or number of reusable cycles.
Do not apply a flame, hair dryer, heating pad, boiling water, microwave, hot metal, chemical heat pack, or another external high-temperature source to force a color change. High heat can damage polyurethane, weaken bonding, distort hardware, or burn skin. The visible effect can vary with room temperature, contact, pressure, wear, and the condition of the material. A temporary or subtle response is not evidence that the product is defective.
Material and construction boundaries
PU leather means a polyurethane-based leather-look material. This page does not describe the cuff as genuine leather, full-grain leather, bonded leather, silicone, rubber, latex-free, vegan-certified, hypoallergenic, phthalate-free, medical-grade, nonporous, waterproof, sterilizable, flame-resistant, or environmentally certified. The available product record does not publish the backing composition, coating thickness, metal alloy, nickel content, adhesive, stitching method, or country of manufacture.
The current product image shows a narrow black band, a color-changing center area, and metal snap hardware. The image does not establish the usable wrist circumference, number of wearable settings, tensile strength, load rating, breakaway force, or compatibility with chains, clips, locks, leashes, anchors, furniture, or suspension equipment. Treat this as a bracelet-style accessory, not verified restraint hardware.
Fit and comfort check
The 9-inch measurement describes the total product length, not the closed circumference or wrist size. The 1.5-inch figure is the maximum width, not a constant width across every point. Because the usable fit range is not published, measure your wrist and compare the received cuff directly before wearing it for an extended period. Do not assume that “one size” means universal fit.
Fasten the cuff loosely enough to slide a fingertip under it without forcing the material. Check that the edge and snap hardware do not pinch skin, catch hair, press on a wrist bone, or interfere with normal hand movement. Recheck after several minutes because warmth, sweat, swelling, movement, and repeated bending can change comfort. Remove it immediately for pain, numbness, tingling, loss of sensation, unusual coldness, swelling, weakness, or pale, blue, purple, or dark discoloration. If symptoms do not resolve after removal, seek medical care.
Consent and safer use
Wear or use the bracelet only between informed adults with clear, ongoing consent. A cuff, outfit, role, photo, event, or previous agreement never creates consent for touching, restraint, or sexual activity. Agree on boundaries and a stop signal before partnered use, and stop as soon as either person asks. The partner communication guide offers a practical starting point.
Do not fasten the cuff around the neck, throat, genitals, or another body area where swelling or restricted circulation could make removal difficult. Do not use it for choking, breath restriction, suspension, body-weight support, lifting, dragging, immobilization, or securing someone to an object. Do not connect it to a leash, chain, rope, carabiner, lock, spreader bar, furniture, or anchor unless the manufacturer expressly publishes compatibility and load guidance for this exact model. None was verified for this product.
If the cuff is incorporated into light role-play, the wearer must remain able to communicate and remove it promptly. Keep both hands accessible, remain awake and sober, and do not leave a wearer unattended. Do not use the bracelet on someone who is asleep, intoxicated, sedated, unable to communicate, or unable to withdraw consent.
Before each wear
- Inspect the PU surface, edges, backing, and every snap for peeling, cracking, sharp points, corrosion, looseness, exposed adhesive, or permanent deformation.
- Open and close the snaps off the body. Do not use the cuff if a snap sticks, separates from the band, or requires painful force.
- Confirm that the band lies flat and that no edge or hardware presses into the wrist.
- Begin with a brief wear test. Recheck skin color, temperature, sensation, swelling, and hand movement soon after fastening.
- Remove the cuff rather than tightening it if it shifts, catches, pinches, or becomes uncomfortable.
For other verified browsing paths, use the Fantasy & Kink tag, Leather & Restraint tag, or restraint tag. These categories organize the catalog; they do not change the cuff’s unverified load and restraint limits.
Compare the matching Heat Tease paddle
The Heat Tease Paw Paddle in red and yellow is a separate 13-inch impact product with its own shape, measurements, intended use, care needs, and safety boundaries. The bracelet is not a substitute for a purpose-built paddle, restraint, collar, or load-bearing cuff. Compare each product page rather than transferring claims between items in the same line.
Cleaning, drying, and storage
Exact-model cleaning and water-exposure instructions were not available on the current supplier page, so the received package directions control. As a conservative default, wipe the surface and hardware with a soft, barely damp cloth, then dry it completely. Do not soak or submerge the cuff, boil it, place it in a dishwasher or washing machine, use steam, or apply bleach, alcohol, solvents, oils, abrasive cleaners, rough brushes, or leather conditioner unless the exact instructions expressly permit that method.
Moisture trapped around snaps, coating edges, or the backing can contribute to corrosion, peeling, odor, or material separation. Leave the bracelet open to air-dry away from direct sun and high heat. Read the Materials & Care hub and cleaning and storage guide for general inspection and drying principles; the received instructions take priority.
Store the cuff flat or in a gentle curve without folding, crushing, or placing weight on the snaps. Keep it clean, dry, and separated from sharp objects, sustained heat, direct sunlight, moisture, cosmetics, oils, dyes, and soft materials that could transfer color or react with the PU coating. Retire it if the surface becomes tacky, cracked, sharply curled, delaminated, permanently stretched, difficult to clean, or unable to fasten and release reliably.
Ordering notes
Review Shipping & Discreet Packaging for parcel information. Opened intimate and body-worn products can have hygiene-related return restrictions, so read Returns, Refunds & Hygiene before opening the package. Return to the full shop for additional comparisons.
