ElectraStim 90-Degree Stimulator Cable is a low-profile replacement connecting lead for compatible ElectraStim stimulators and 2mm accessories. The right-angle accessory plugs are designed to reduce cable strain when a compatible insertable electrode is used while sitting or riding. This exact Stag Standard listing is product 2604 / store SKU CYEM2212; ElectraStim identifies the manufacturer model as EM2212.
This is a connection accessory, not a stimulator or electrode. It does not create sensation by itself. You still need a compatible ElectraStim controller and a suitable electrode, and you should follow the instructions supplied with both. Do not assume compatibility with a TENS unit, a 4mm banana-plug accessory or another brand solely because a connector looks similar.
Verified manufacturer specifications
| Field | Manufacturer information |
|---|---|
| Manufacturer model | EM2212 |
| Purpose | Replacement cable with low-profile 90-degree accessory plugs |
| Cable length | 1.2 metres / 3 feet 9 inches |
| Accessory connection | 2mm |
| Stimulator connection | 3.75mm safety type |
| Materials | Nylon, PVC, copper, cord and nickel-plated brass pins |
| Manufacturer compatibility | ElectraStim stimulators |
The right-angle design is intended to protect the connection from the bending pressure that a straight lead can experience in seated positions. It does not make every insertable toy safe to sit on, and it does not replace the electrode maker’s positioning and use instructions.
When to use the original cable instead
ElectraStim specifically advises using the original cable with its Stealth Base accessories, including Komodo, Habanero and Rocker Butt Plugs, because those bases already protect the connection. Follow that product-specific recommendation even though the EM2212 cable is otherwise described by the maker as compatible with ElectraStim stimulators.
Connection checklist
- Read the current instructions for the stimulator and chosen electrode before connecting anything.
- Switch the stimulator off and return intensity to zero.
- Inspect the cable, plug bodies, pins and strain reliefs. Do not use the cable if insulation is split, pins are bent or loose, or wire is exposed.
- Insert the 3.75mm safety-type connector fully into the compatible ElectraStim stimulator.
- Connect the 2mm pins only to a compatible ElectraStim electrode, following that electrode’s polarity and connection instructions.
- Route the cable with slack so body movement does not pull at the plugs or trap the lead under an edge.
- Place the electrode as instructed, then power on at zero and increase intensity gradually.
The maker’s beginner guidance says an ElectraStim circuit requires one bipolar electrode or two unipolar electrodes and that both 2mm pins must be connected for sensation. The electrode product—not this cable—determines which setup applies.
Electrostimulation safety
Use electrostimulation equipment only below the waist and never route current across the chest. Do not use it on the head or neck, in or around water, or on inflamed, swollen, broken or infected skin. Stop immediately if you notice pain, burning, unexpected muscle response, dizziness, equipment heat, intermittent output or any cable damage.
ElectraStim says not to use electro-sex equipment if you have a heart condition, an implanted mechanical medical device such as a pacemaker, epilepsy, pregnancy, or a penile, anal or other relevant disorder or infection. If your health situation is uncertain, do not experiment based on a product page; obtain appropriate individualized medical advice first.
Never modify the plugs, splice the cable, use makeshift adapters or mix the lead with mains-powered equipment. Keep the wearer able to communicate and stop the controller. A partner operating the controls should agree on limits and a stop signal before play and should never increase intensity unexpectedly.
Care, storage and replacement
Disconnect the lead from the controller and accessory before cleaning. Wipe the exterior with a lightly damp cloth if the maker instructions permit, keep moisture out of the connectors and allow everything to dry completely before reconnection. Do not submerge the cable.
Store it loosely coiled in a dry place away from tight bends, crushing pressure, heat, pets and metal objects. Unplug by holding the molded plug body rather than pulling the cord. Replace the cable if output becomes intermittent, the strain relief separates, insulation cracks, pins loosen or corrosion appears.
Compare and shop
Browse the ElectraStim collection, compare the electrostimulation category, or review products tagged 90-degree cable, e-stim accessory and replacement cable.
For general material and storage context, see the materials and care guide. The live offer controls current price and stock. Review shipping and discreet packaging and the returns, refunds and hygiene policy before opening if connector compatibility is uncertain.
Frequently asked questions
What does the 90-degree cable do?
It replaces the standard connecting lead and presents lower-profile right-angle 2mm plugs at the accessory end, helping reduce bending pressure during compatible seated or riding use.
Will it work with any ElectraStim controller?
ElectraStim describes model EM2212 as compatible with its stimulators. The chosen accessory must still use the correct 2mm connection and be suitable for the intended placement.
Should I use it with Komodo or another Stealth Base accessory?
The maker recommends the original cable for Komodo, Habanero and Rocker Butt Plugs because their Stealth Base already protects the connection.
Can I use it in water?
No. ElectraStim advises keeping stimulators and electrodes out of water, and the cable should not be submerged or connected while damp.
