Creature Cocks Uni-Glow is a clear-and-rainbow manual silicone dildo shaped like a tapered unicorn horn. A spiral rainbow core sits inside the clear outer body and is designed to glow in the dark. The current official XR Brands page identifies this model as maker SKU AH310; The Stag Standard uses store SKU XRAH310. The reconciled UPC is 848518053534.
Verified product specifications
| Store SKU | XRAH310 |
|---|---|
| Maker SKU | AH310 |
| UPC | 848518053534 |
| Brand | Creature Cocks by XR Brands |
| Color | Clear outer body with rainbow core |
| Operation | Manual; no batteries |
| Total length | 7.7 inches |
| Insertable length | 6.4 inches |
| Insertable diameter | 0.6 inch at the narrowest published point; 2.1 inches at the widest published point |
| Material wording | Silicone; the maker describes it as phthalate-free, but no independent material certification was verified |
| Base | Wide flanged suction-cup base; maker-described as harness compatible |
| Lubricant | Water-based lubricant only, per the maker |
Measurement boundary: the published diameters describe the product, not the right fit for every body. The profile expands from 0.6 inch near the narrow end to 2.1 inches at the widest insertable point. A mathematically calculated circumference is not the same as a separately measured flexible perimeter, so compare the published diameters directly. The dildo buyer guide explains how length, width, taper, texture, firmness, base design, and intended body area affect a practical comparison.
Shape, texture, and glow effect
The horn profile uses raised spiral bands rather than a smooth shaft. The narrow tip provides a smaller starting point, while the spiral body adds both texture and increasing width. Move slowly enough to notice each change in diameter. Do not force the widest section or use numbing products to hide pain, pressure, or loss of sensation.
The rainbow core is designed to glow after exposure to light, but no exact charging time, brightness, or glow duration was published for this release. Treat the effect as a visual feature rather than a performance guarantee. Keep the product away from direct sunlight and high heat during storage, following the current maker guidance.
Suction-cup and harness use
For suction-cup placement, start with a clean, smooth, nonporous, completely dry surface. Clean and dry the base, press it firmly to remove trapped air, and pull by hand in several directions before body contact. Moisture, texture, grout, seams, angle, or movement can break the seal. The suction cup is not a structural anchor; never use it for suspension, climbing, weight bearing, or any position where a sudden release could cause a fall.
The maker describes the flanged base as harness compatible, but harness openings, plate stiffness, strap geometry, wearer movement, and desired depth vary. Compare the base and shaft dimensions with the exact harness instructions and test retention before insertion. The Harness Compatible collection is a shopping filter, not a universal-fit promise.
Fit and use checks
- Inspect the silicone, spiral edges, tip, shaft, glow core, and base. Do not use the product if it is torn, sticky, swollen, rough, discolored, or separating.
- Apply generous water-based lubricant. The maker directs water-based lubricant only; the water-based lubricant guide explains compatibility and reapplication.
- Control the product by hand first. Advance gradually and stop before depth, width, texture, or angle becomes painful or difficult to control.
- If used anally, keep the entire flanged base outside the body and easy to grip. A wide base reduces migration risk but does not eliminate it.
- Stop for pain, numbness, bleeding, marked swelling, loss of sensation, broken skin, or discomfort that does not ease promptly. Seek medical care when symptoms are severe, persistent, or removal is difficult.
For partnered use, agree on intended body area, depth, pace, angle, who controls movement, and a stop signal before insertion. The receiving partner must be able to pause or end use at any time. Review the partner-use guide before combining the product with a harness or fixed surface.
Cleaning and storage
- Wash before and after use with warm water and mild unscented soap, following the instructions received with the exact item. A compatible toy cleaner may be used when its directions permit it.
- Rinse away soap and lubricant from every spiral groove and from the edge of the base. No exact waterproof or submersible rating was verified, so do not soak or submerge unless the received instructions explicitly allow it.
- Air-dry completely, including the spiral recesses and underside of the base. Store separately from other soft materials, direct sunlight, high heat, dust, and sharp objects.
- Reinspect before the next use. Replace the product rather than using silicone that has changed texture, torn, swollen, become sticky, or separated around the core or base.
Do not boil, dishwasher-clean, bleach, or attempt to sterilize this product unless the exact instructions received with it explicitly authorize that method. The cleaning and storage guide and materials and care hub provide conservative maintenance guidance.
Browse the Dildos collection, the Creature Cocks collection, Fantasy & Kink products, Fuller options, and the Glow in the Dark collection. Orders use discreet outer packaging. Review the returns, refunds, and hygiene policy before opening an intimate product.
