Creature Cocks Resurrector Phoenix is a red-and-white fantasy silicone dildo with pronounced ridges, bumps, a fuller knot and a manual squirting system. A 100 mL syringe connects to a 28-inch silicone hose at the base so water-based personal lubricant can travel through the internal channel and exit at the tip. The broad suction-cup base supports hands-free positioning on a suitable surface.
Verified product specifications
| Store SKU | XRAH309 |
|---|---|
| Maker SKU | AH309 |
| UPC | 848518053527 |
| Total length | 9.1 inches |
| Insertable length | 7.5 inches |
| Insertable diameter | 1.6 inches at the narrowest point; 2.7 inches at the widest point |
| Syringe capacity | 100 mL |
| Hose length | 28 inches |
| Materials | Silicone dildo and hose; polypropylene syringe |
| Operation | Manual syringe-and-hose squirting system; no batteries |
| Base | Suction-cup base |
Shape, texture and fit
The tapered tip begins at a maker-published 1.6-inch diameter. The shaft then adds raised rope-like ridges, rows of bumps and a fuller section that reaches 2.7 inches at the widest insertable point. With 7.5 inches of insertable length, this is a substantial product intended for people who already understand their preferred depth and fullness. The live catalog therefore classifies it as Advanced and Fuller.
Measurements describe the product, not the right fit for every body. Start slowly with generous compatible lubricant, keep the external base accessible and control depth by hand before relying on the suction base. Do not force the widest section. Stop for pain, numbness, bleeding, loss of sensation or discomfort that does not ease immediately.
How the manual squirting system works
- Fill the syringe only with body-compatible water-based personal lubricant.
- Wipe excess lubricant from the syringe tip so the connection is easy to see and hold.
- Insert the syringe tip into the clear tubing and push the tubing down until it sits flush against the syringe for a secure connection.
- Connect the hose to the port in the base, then press the syringe slowly to prime the tube before insertion. Test the path over a sink or towel.
- During use, press the plunger gradually. Never use enough force to overcome a blockage. Stop, disconnect and clean the system if flow is restricted.
The maker specifies water-based personal lubricant only. Do not put bodily fluids, medication, numbing products, food, oil, silicone lubricant, cleaner, alcohol or another unverified liquid into the syringe, hose or internal channel. The system is a novelty feature, not a medical device, contraceptive or method of preventing sexually transmitted infections. See the water-based lubricant guide and materials and care guide.
Using the suction-cup base
Use the base on a clean, smooth, nonporous surface. Clean both the surface and the suction cup, press firmly to remove trapped air and test stability by hand before use. Moisture, texture, seams and body movement can break the seal. Keep at least one hand available until you know the base is stable in that position.
The suction cup is not a structural anchor. Never use it for suspension, climbing, attaching weight or any setup where a sudden release could cause a fall. If the product is used anally, the entire external base must stay outside the body and remain easy to grip. A broad base reduces migration risk but does not remove the need for slow pacing and immediate retrieval access.
Solo and partner use
For solo use, practice connecting, priming, pressing and disconnecting the syringe before insertion. Position the hose so it cannot kink, pull against the base or become wrapped around the body. Guide your body toward the product rather than dropping weight onto it. Do not sleep with it inserted or use it when sensation, judgment or control is impaired.
For partner use, agree in advance on depth, pace, whether the squirting feature will be used, who controls the syringe and a stop signal. The fuller section and strong texture can feel different as angle changes, so increase depth gradually and check in before moving past the widest point. The partner-use guide covers communication, pacing and control.
Use a compatible barrier when sharing or moving between body sites, and replace the barrier between users or sites. Clean the product before and after every use. Do not use the same lubricant remaining in the syringe for a second person or session.
Cleaning the dildo, hose and syringe
- Disconnect the syringe and hose, then empty all remaining lubricant from every component.
- Wash the dildo, hose and syringe with warm water and mild unscented soap. The maker permits soaking these non-powered parts in soapy water, followed by a thorough rinse.
- Flush the hose and internal channel until no lubricant or soap residue remains. Never leave lubricant stored in the syringe, hose or product.
- Let every component air-dry completely, including the channel, hose ends, syringe tip and connection at the base.
- Store the clean, dry pieces separately from other soft materials, direct sunlight, high heat and sharp objects.
Do not boil, machine-wash or use bleach, alcohol, solvents or harsh cleaners unless the instructions received with the exact item explicitly authorize that method. Inspect the silicone, base, hose, syringe and connection before each use. Stop using the set if silicone tears, becomes sticky or swells; if the hose cracks or no longer seals; if the syringe sticks or leaks; or if the internal path cannot be cleaned and dried. Review the cleaning and storage guide.
Browse more options in Dildos, the Creature Cocks collection, Fantasy & Kink or the Fuller assortment. Orders use discreet outer packaging; review the returns, refunds and hygiene policy before opening an intimate item.
