Creature Cocks Eyegor Thrusting & Vibrating Silicone Dildo

$117.99

Creature Cocks Eyegor is a green-and-red rechargeable silicone fantasy dildo with remote-controlled thrusting and vibration, a light-up eye, a suction-cup base, and an IPX7 product rating. Maker SKU AH778; UPC 848518061003.

Product facts

Intended use
Fullness or penetration, For Two
Material
Premium Silicone Over A Plastic Mechanism
Firmness
Structured Powered Shaft With A Silicone Exterior And Suction Cup Base
How it works
Remote controlled, Vibrating Or Powered
Experience level
Advanced
Solo or partnered
Solo, Partnered, Harness
Insertable or usable length
8.8 in
Maximum diameter
2.1 in
Maximum circumference
6.6 in
Total product length
9.6 in

Creature Cocks Eyegor is a rechargeable green-and-red fantasy dildo with a grooved shaft, rounded head, knot above the base, and a color-changing light-up eye. Its cordless remote controls three speeds and four patterns of thrusting and vibration.

Verified product details

BrandCreature Cocks by XR Brands
ProductEyegor Thrusting & Vibrating Silicone Dildo
Store SKUXRAH778
Manufacturer SKU / MPNAH778
UPC / GTIN-12848518061003
ColorsGreen and red
MaterialsSilicone and plastic
FunctionsThree speeds and four patterns of thrusting and vibration
ControlCordless remote; the color-changing eye indicates the selected setting
PowerUSB rechargeable
Product ratingIPX7 waterproof, according to XR Brands
Maker-published overall length9.2–9.6 in when fully extended
Maker-published insertable length8.4–8.8 in when fully extended
Maker-published insertable diameter1 in at the narrowest point; 2.1 in at the widest point
Maker-published thrust travel0.4 in
BaseSuction cup; XR Brands describes it as harness compatible

The measurement ranges reflect the product’s thrust travel. The 8.8-inch maximum insertable length describes capacity, not a target depth. The 2.1-inch widest diameter is approximately 6.60 inches around a circular section, but the shaft is not uniformly that wide.

Size and fit

Compare the 2.1-inch widest diameter with a product you already use comfortably. The store’s Advanced and Fuller tags are browsing labels rather than a fit or comfort guarantee. Start with only the depth and width you can control comfortably; do not force the knot or widest section through resistance.

Inspect the silicone, shaft, head, knot, base, charging connection, and remote before each use. Do not use the product if it is torn, split, swollen, sticky, peeling, sharply creased, separating from the base, overheating, charging abnormally, or behaving unpredictably.

Setup and use

  1. Charge only with the supplied or maker-approved cable and power source. Keep the charging connection dry and unobstructed, and do not charge the product while wet, in use, or unattended.
  2. Wash and dry the insertable surface before first use. Apply plenty of water-based lubricant as the broad compatibility starting point for silicone toys and common barriers.
  3. Test the remote and every setting before body contact. Begin at the lowest preferred setting, maintain control of the base, and add lubricant whenever movement begins to drag.
  4. Stop for sharp, increasing, persistent, or concerning pain; numbness; burning; broken skin; unexpected bleeding; overheating; suction failure; loss of control; product damage; or abnormal motor behavior.

For suction-cup use, choose a clean, smooth, flat, nonporous, stable surface. Press the base down firmly and test the hold by hand before body contact. Recheck it whenever the angle or intensity changes. Do not use the suction cup on glass, fixtures, furniture, or other surfaces that could break, tip, detach, or be damaged, and do not treat it as a lifting or body-weight support.

“Harness compatible” does not mean every harness will fit. Compare Eyegor’s base and shaft with the harness maker’s O-ring size, base-shape, and material requirements before use.

Cleaning, water exposure, and storage

XR Brands rates the product IPX7 waterproof. Treat that rating as applying to the toy itself, not automatically to the separate remote, USB cable, plug, wall adapter, or an open or wet charging connection. Follow the package instructions for permitted water exposure and ensure the charging area is completely dry before charging.

Wash the insertable silicone surface with warm water and mild unscented soap or a maker-compatible toy cleaner. Keep cleaner and rinse water within the limits of the maker’s instructions, rinse permitted cleaner away, and dry the shaft, grooves, knot, eye area, base, and charging area completely. Wipe the remote only as its instructions allow.

Do not boil, bleach, place the powered product or remote in a dishwasher, or use alcohol, solvents, abrasive cleaners, or high heat unless XR Brands expressly approves that method. Clean between users and use a new compatible barrier when moving between people or body areas. Store the toy and remote powered off, clean, dry, away from heat and direct sunlight, and separated from other materials that could stain or react with the silicone.

Browse Creature Cocks, compare dildos, see harness-compatible products, read how to choose a dildo, review sizing and fit, check materials and care, or see the returns, refunds, and hygiene policy.