Bang! 28X Remote-Control Vibrating Cock Ring and Bullet – Black combines two stretchy silicone openings with a removable vibrating bullet and wireless controller. This exact Stag Standard listing is SKU XRAG572-Black; the manufacturer identifies the model as AG572-Black.
The smaller ring is designed for the shaft. The larger opening is designed for cock-and-ball wear, sitting around the shaft and behind the testicles. The bullet rests in the upper sleeve to transmit vibration through the harness. Fit and sensation vary with anatomy, placement, erection level, and vibration setting.
Measurements and construction
- Overall harness size: 3 by 3 inches.
- Small ring inner diameter: 1.25 inches.
- Large ring inner diameter: 2 inches.
- Bullet size: 0.8 by 3 inches.
- Materials: silicone and ABS plastic.
- Color: black.
- Control: wireless remote.
- Power: USB-rechargeable bullet.
- Vibration: four speeds and seven patterns, marketed as 28 combinations.
- Manufacturer description: waterproof ring/bullet assembly; do not assume the remote is waterproof.
Measurements are unstretched reference points, not a guarantee of comfort. Silicone flexibility does not make the product safe for every body or for unlimited wear. Both openings must fit comfortably and remain easy to remove.
Fit the two openings separately
Learn the arrangement while relaxed. Apply a compatible water-based lubricant to the inner surfaces. Guide the penis through the smaller ring and position the larger ring around the shaft and behind the testicles only as the received instructions direct. Insert the bullet into its sleeve in the stated orientation before use.
Do not force, twist, or snap the rings over tissue. Check the shaft and scrotal fit independently because either opening can become too restrictive. Remove the harness immediately for pain, pinching, numbness, tingling, coldness, swelling, marked color change, loss of sensation, or difficulty maintaining a comfortable position.
Circulation and wear-time boundaries
A cock-and-ball ring can restrict circulation even when the silicone feels soft. Follow the manufacturer’s maximum wear time and removal directions in the received package. Do not sleep, become impaired, or move beyond quick removal while wearing it. Never use a damaged ring or rely on vibration to distract from pressure.
Anyone with a circulatory, bleeding, nerve-sensation, genital, urinary, post-surgical, or implanted-device concern should ask an appropriate clinician before using a constricting ring. If the product cannot be removed and circulation symptoms continue, seek urgent medical help rather than waiting for the motor or erection to change.
Four speeds, seven patterns, and remote use
The maker describes four vibration speeds and seven patterns. “28X” refers to the possible speed-and-pattern combinations in the product marketing; it should not be read as 28 separate motors or independent zones. Test the bullet outside the harness, begin low, and learn the remote before wearing the rings.
A partner can change settings with the wireless remote, but the wearer should retain a direct stop and removal method. Agree on settings, stop signals, and check-ins first. Wireless range can vary with walls, interference, body position, and battery level. Loss of connection should lead to a direct control or removal plan, not continued unattended wear. Read our partner-use guide.
Charging and battery care
Remove the bullet from the silicone sleeve when the instructions direct and connect the included USB charging cable to an allowed power source. Place it on a dry, stable, ventilated surface away from bedding, sinks, tubs, heat, and direct sun. Never charge while wet or while the bullet is inside the worn harness.
Inspect the cable, connector, bullet housing, and remote before use. Stop using a component that is cracked, swollen, unusually hot, leaking, corroded, or giving off an unusual odor. The manufacturer page does not specify a waterproof rating for the remote, so keep it dry unless the received instructions expressly state otherwise.
Solo and partner positioning
The upper bullet sleeve is intended to place vibration over the shaft and toward a partner’s body depending on position. Product marketing mentions clitoral contact, but the harness can also be used for external vibration without assuming a partner’s anatomy. The Stag Standard describes the construction rather than promising one type of stimulation or orgasm.
Reposition only after reducing power and checking both rings. Avoid positions that sharply bend the bullet, trap the remote, compress the scrotum, or make removal difficult. Do not combine the harness with another restrictive ring or clamp unless the manufacturer expressly approves the combination.
Lubricant compatibility
Use a water-based lubricant unless the current manufacturer instructions approve another formula. Silicone lubricant may affect some silicone products, and oil-based formulas can affect some barriers. Check ring, lubricant, condom, and barrier compatibility together. Apply enough to reduce friction but keep charging contacts and the remote dry.
Do not use numbing products to conceal pain or circulation signals. If lubricant dries or fit changes, stop, remove the product, reassess, and reapply only within the instructions. The Materials & Care hub explains compatibility basics.
Cleaning the harness and bullet
Switch the bullet off and disconnect it from charging. Remove it from the silicone harness if the instructions permit. Wash the waterproof components with warm water and mild soap or a compatible toy cleaner only as directed. Keep the remote and charging hardware out of water unless their own rating expressly allows contact.
Clean the two openings, bullet sleeve, seams, and contact surfaces without sharp tools or abrasive pads. Do not boil, bleach, dishwasher-clean, use solvents, or expose electronics to household disinfectants unless XR Brands expressly permits the method. Rinse as directed and dry every component, recess, and charging point completely before reassembly or storage. See how to clean and store sex toys.
Inspection, sharing, and storage
Before and after each use, stretch the silicone gently under good light. Retire it for tears, whitening stress marks that do not recover, permanent tackiness, swelling, exposed components, damaged seams, or an opening that no longer returns to shape. A damaged ring can fail or become difficult to remove.
Cleaning does not sterilize the product. Use compatible barriers and separate cleaning practices when sharing or changing body areas. Store the dry harness without sharp folds, and keep the bullet, remote, and cable protected from impact and accidental activation. Follow current battery-device travel rules and our travel guide.
Opened intimate products are generally subject to hygiene restrictions. Inspect packaging and read the returns and hygiene policy before opening if size or fit is uncertain.
Exact listing summary
- Product: Bang! 28X Remote-Control Vibrating Cock Ring and Bullet – Black.
- Store SKU: XRAG572-Black; maker model AG572-Black.
- Construction: two silicone rings plus removable ABS/silicone bullet.
- Openings: 1.25-inch small ring and 2-inch large ring.
- Bullet: 0.8 by 3 inches; USB rechargeable.
- Settings: four speeds and seven patterns.
- Control: included wireless remote.
- Safety focus: confirm both openings fit, monitor circulation, and follow the received wear-time limit.
Compare more cock rings and ball toys, review discreet shipping, or browse the full shop.
