The b-Vibe Headz is a manual, non-vibrating XXL dildo with three progressive bulb sections, smaller head-shaped nodes between the larger contours and a wide flared suction base. It is intended for experienced shoppers who already know that a 7.5-inch maximum circumference and a 10-inch insertable length are appropriate for them. It has no battery, charging cable, motor, remote or app.
Current maker specifications
| Store and maker SKU | BV-164 |
|---|---|
| GTIN | 4890808305409 |
| Operation | Manual and non-vibrating |
| Material | Phthalate-free PVC, according to the current exact b-Vibe page |
| Total length | 10.5 inches |
| Insertable length | 10 inches |
| Maximum circumference | 7.5 inches |
| Product weight | 1.7 pounds; this is the maker-listed product weight, not the stored 2.2-pound packaged shipping record |
| Texture | Three progressive bulb sections with smaller head-shaped nodes |
| Base | Wide flared suction base; the maker specifies smooth surfaces |
Measurement correction: older catalog copy on this store listed an 8.8-inch maximum circumference and an approximate 2.8-inch diameter. The current exact b-Vibe page instead lists a 7.5-inch maximum circumference and does not publish a maximum diameter. This release uses the current maker value and does not invent the missing diameter. The stored 6.75 × 4.75 × 22.875-inch dimensions are package/shipping data, not body dimensions.
PVC is a soft, porous material. Read the received label before use and use the materials and care guide for questions about material handling. Measurements describe the product; they do not promise comfort, fit or a particular sensation.
Who this size and texture suit
This model is best treated as an advanced-size product. The three stepped bulb sections create abrupt circumference changes instead of one smooth taper. Smaller nodes add localized texture between the broader sections. If you have not already used products near this circumference comfortably, choose a smaller option and progress gradually rather than treating the last bulb as a target.
- Inspect the entire surface, each groove, every node and the base. Do not use it if the PVC is torn, cracked, sharply nicked, unusually tacky, swollen, discolored or separating.
- Use generous compatible lubricant. The exact product page says the model is compatible with all lubricants, but received-package directions control if they differ. Water-based lubricant is the conservative first choice when you are uncertain; the water-based lubricant guide explains label and ingredient checks.
- Warm up with fingers or a smaller product. Insert slowly, one contour at a time, without forcing. Pause before each increase in circumference and keep the base reachable.
- Stop immediately for sharp or excessive pain, numbness, loss of sensation, bleeding, tissue injury, marked discoloration, dizziness or a trapped position. Seek medical care for serious or persistent symptoms.
Do not share a porous PVC product between people. Do not use it on injured or irritated tissue, leave it inserted unattended, or use the product or its suction base as a restraint, body-weight support or climbing anchor. Browse other advanced products, the anal-play collection and other XXL options only after comparing size and experience level.
Suction-base setup
The current maker page says the suction cup anchors to smooth surfaces. Results depend on the surface, cleanliness, angle and applied force, so suction is not guaranteed. Clean and dry both the base and a smooth, flat, nonporous mounting surface. Press the base firmly, test it at low force with your hand, keep the installation low and reachable, and reassess during use. Avoid rough, porous, curved, fragile, painted or high surfaces. Handheld use remains an option if the base does not hold reliably.
Cleaning, drying, and storage
- Clean before first use and promptly after every use. Wash the surface and the grooves around the nodes and bulb transitions with warm water and mild antibacterial soap, following the received instructions.
- Rinse or wipe away all soap and residue. Do not claim that ordinary washing sterilizes porous PVC.
- Leave the product to air-dry and physically confirm that the grooves, base edge and underside are completely dry. A fixed number of hours is not proof of dryness.
- Store separately in a clean, dry, cool, dark place away from direct sun, high heat, dust, sharp objects and prolonged contact with other soft materials. Do not boil, put it in a dishwasher or expose it to solvents or household disinfectants unless the received manufacturer instructions expressly permit that method.
Use the broader cleaning and storage guide for a repeatable care sequence. The current b-Vibe support page publishes a one-year limited warranty from the original purchase date against faulty workmanship or materials and says proof of purchase is required; warranty eligibility and remedies remain subject to b-Vibe's current terms.
Compare the Dildos collection or browse the b-Vibe collection. Orders use discreet outer packaging; review the returns, refunds, and hygiene policy before opening an intimate product.
