Arcwave Pow is a reusable, manual dual-entry stroker with a removable textured silicone sleeve, a finger-controlled air valve, a protective ABS case, and ventilated lids. It has no battery or electronic components. The Stag Standard currently offers Black and Blue; choose the color on this page before adding it to your cart.
How the suction control works
The sleeve creates suction through air pressure rather than a motor. Cover the release valve with a finger to increase the sealed sensation; uncover it to reduce suction and let air back in. Start with the valve open, add pressure gradually, and never force the product on or off.
- Operation: Manual; no charging, battery, or electronics
- Entries: Dual-entry design
- Available colors here: Black or Blue
- Materials: Removable silicone sleeve and ABS outer case
- Manufacturer-stated composition: Made without phthalates, BPA, or latex
- External product dimensions: 70 × 180 mm (about 2.76 × 7.09 in)
- Product weight: 380 g (about 13.4 oz)
- Flexible internal diameter: 3–4.5 cm (about 1.18–1.77 in)
- Insertable length: 17 cm (about 6.69 in)
The inch and ounce values are approximate conversions. External size and flexible internal fit are different measurements. Measure before ordering and leave room for comfort; the stated range is not a universal-fit guarantee. Use the stroker selection guide to compare texture, pressure style, opening, and cleaning needs.
Use and fit routine
- Remove both lids and inspect the sleeve, case, valve openings, and edges. Do not use a torn, warped, or damaged product.
- Apply plenty of compatible water-based lubricant to your body and the sleeve opening.
- Begin slowly with the pressure-release holes uncovered. Cover the valve only when you want more suction.
- Stop if you feel pain, numbness, pinching, concerning color change, or bruising. More suction is not automatically safer or better.
- For removal, uncover the valve, relax, and pull off slowly. Do not yank against a sealed sleeve.
Use only on intact external skin and do not share without an appropriate barrier and a complete cleaning between users. If irritation persists, stop use and seek qualified medical advice. This retail product is not presented as a treatment, diagnostic device, performance guarantee, or substitute for clinical care.
Water resistance, cleaning, and drying
Arcwave rates Pow waterproof and suitable for shower use. That rating does not imply dishwasher, boiling, microwave, bleach, or sterilization compatibility. Follow the received manual if its directions are more restrictive.
- Uncover the valve, remove the silicone sleeve from the case, and wash the sleeve under running water with mild soap or a compatible toy cleaner.
- Rinse away all soap and lubricant from the sleeve texture and openings.
- Wipe or rinse the case as permitted by the received instructions.
- Leave every part open to air-dry completely before reassembly. Trapped moisture can undermine clean storage.
- Replace the ventilated lids only after the parts are dry; inspect again before the next use.
See the detailed stroker cleaning and drying guide, the broader toy cleaning and storage guide, and Materials & Care for compatible-care basics.
Compare more options in Strokers & Masturbators, continue through the full shop, or use Start Here for a guided route.
