Arcwave Pow in black is a battery-free stroker that uses a removable textured silicone sleeve and a simple air-pressure valve instead of a motor. Covering or uncovering the valve changes the sleeve’s grip and suction during manual strokes. Its two open ends allow either direction of entry, while shaped protective lids support cleaner transport and ventilated drying. This exact Stag Standard listing is SKU 84584; Arcwave identifies Pow as model GTN00A.
Verified design and dimensions
- Operation: manual; no battery, charger, app, remote, motor, or vibration.
- Entry: dual-ended opening.
- Suction control: finger-operated air-pressure release valve.
- Sleeve: removable textured CleanTech body-safe silicone.
- Body: ABS with silicone contact surface.
- Published exclusions: made without phthalates, BPA, or latex.
- Dimensions: approximately 70 × 180 mm / 2.76 × 7.09 inches.
- Weight: approximately 380 g / 13.4 oz.
- Water rating: manufacturer describes the assembled product as waterproof.
- Manufacturer warranty: two years, subject to Arcwave terms and proof requirements.
Pow’s suction changes with the air path. Covering the valve reduces incoming air and can increase grip; uncovering it releases pressure. That control is manual and immediate, but it is not a vacuum pump and should not be used to chase pain, discoloration, numbness, swelling, or difficult removal.
Fit and first-use setup
- Remove both lids and slide the silicone sleeve out of the rigid body.
- Inspect the sleeve, rim, air channel, valve, case, and lids for tears, sharp damage, tackiness, blocked openings, or trapped debris.
- Wash, rinse, and dry the sleeve according to the included instructions before first use.
- Apply water-based lubricant to the penis and the chosen opening; keep the air valve unobstructed until insertion feels comfortable.
- Begin with slow, short manual strokes. Cover the valve only briefly to learn how much additional grip it creates.
- Release the valve and withdraw if pressure becomes uncomfortable or removal begins to feel difficult.
The flexible sleeve is designed to accommodate varied sizes, but “all sizes” should not be read as a guarantee of fit. Stop for sharp pain, numbness, coldness, swelling, pronounced color change, trapped skin, or unusual resistance. Do not add external vacuum equipment, seal the valve with tape, or use the body as a clamp.
Control suction without overdoing it
Change only one variable at a time: lubricant, stroke speed, grip, entry direction, or valve coverage. Full valve coverage can feel much stronger than an open airway. Uncover it before changing direction or removing the toy. If the sleeve does not release promptly, stop motion, uncover the valve, add lubricant at the rim, and ease out slowly.
Pow is a manual option for shoppers who prefer direct control without charging. For adjustable mechanical tightness, compare the Arcwave Voy. For vibration, see the Arcwave Zing. For air-wave frenulum stimulation rather than manual suction, compare the rechargeable Arcwave Ion 2.
Lubricant and material care
Use water-based lubricant as the safest default for silicone. Do not use silicone lubricant unless Arcwave’s instructions for this exact model permit it after a small patch test. Oil can affect condoms and can complicate cleaning. Reapply before friction rises rather than compensating with faster motion or stronger suction.
Review the water-based lubricant guide and materials and care reference. Do not use numbing products, which can hide pressure and friction warnings.
Cleaning, drying, and storage
Remove the silicone sleeve from the rigid case after use. Wash the sleeve and any permitted wet-clean components with warm water and mild unscented soap, following the physical manual for valve and case cleaning. Rinse away lubricant and cleaner from every texture and opening. Waterproof does not excuse use of boiling water, bleach, a dishwasher, solvents, abrasives, or a damaged seam.
Shake off water, pat with a clean lint-free cloth, and allow every surface and air channel to dry completely. The removable sleeve and ventilated lids are intended to speed drying, but enclosing a damp sleeve can trap moisture and odor. Reassemble only when the valve, case, sleeve, and lids are dry.
Store the clean product with its protective lids in a cool place away from direct sun, heaters, sharp objects, dyes, and contact with other soft materials. Read the cleaning and storage guide, the stroker drying guide, and the travel guide. Browse more strokers and sleeves.